What to do if there are pits in the multi layer solid wood floor

1. Keep the floor dry and clean, and it is not allowed to mop the floor with a dripping mop or wipe the floor with alkaline water and soapy water, so as not to damage the gloss of the paint surface; If the air in your home is dry, a mop can be wetted or a basin of water or a humidifier can be placed on the heater.

Humidification. 2. Try to avoid sun exposure, so as not to expose the surface paint to ultraviolet rays for a long time.

premature aging and cracking under irradiation.

3. If the floor is partially plated.

If there is an oil stain, you can use a rag dipped in warm water to wipe with an appropriate amount of special cleaning agent for the floor, and you can not use a strong acid and alkali liquid to clean the wooden floor. In the case of drugs or pigments, the stain must be removed before it has penetrated the surface of the wood.

4. Try to avoid long-term contact between the floor and water, especially not with hot water, so once there is hot water sprinkled on the floor, it should be dried in time.

5. It is best to wax every three months, and clean the stains on the surface of the floor before waxing. In fact, it is okay not to play, but it is often waxed, and it can maintain multi-layer parquet.

the finish and prolong the life of the floor.

6. Avoid sharp objects scratching the ground, do not throw cigarette butts on the floor or place things that are too hot directly, and try to avoid dragging heavy furniture.

If the area is small, you can contact the seller, call the maintenance person to do a repair for you, adjust the paint to make up it, the repair rate of the dark color floor is up to 95 or more, if the area is relatively large, it may be seen after the repair, on the surface, I recommend that you replace a few, the price is not too expensive solid wood plywood.

In this case, it's impossible to repair it to its original appearance, so you can just find a painter and buy a paint that is about the same color as the floor, and paint the original pit and fill the pit with a flat surface around it.