What are the consequences of not waterproofing the bathroom?

The bathroom is not waterproof, and if you take a shower upstairs, even if you go to the toilet to flush the water, it may leak out. Let's talk about how to make the bathroom waterproof:

1. Use cement mortar on the ground to find a slope in the direction of floor drain, but the surface should be smooth. The slope near the entrance is small, and the slope near the floor drain is large.

2. The pipeline passes through the root of the floor slab and near the floor drain to strengthen the waterproofing. The pipe root building sealing paste is tightly sealed, and the cement is smoothed after the foot guard, and when the waterproof coating is brushed, the glass wire cloth is reinforced with 1 or 2 layers.

3. The wall is clean and flat, without floating ash and small particles, and the small original corner or slope angle is wiped at the junction of the wall and ground. When brushing waterproof coating, paste 1 2 layers of glass wire cloth reinforcement.

4. The total thickness of the polyurethane waterproof coating film is required to be more than millimeters. It can't be decided by the number of passes. The pipe root and the corner of the reinforcing layer are brushed first, and after the surface is dried at room temperature for 4h, then a large area is brushed and scraped. There shall be no leakage and bubbling. Brush a large area for 24 hours and then apply the next layer after curing.

6. The waterproof layer on the ground should be painted 300mm wide outside the door of the bathroom. The waterproof layer of the waterproof ground should be 200mm higher than the ground.

7. Do a 36-hour closed water test as required.

Try not to splash water on the wall in the bath, there is no big problem, frequent splashing will cause the wall to re-damp. Just get the tile joints right. It's better to make a beautiful sewing.

To put it seriously, the water in the kitchen and bathroom is chemical, which can corrode the steel bars of the building, reduce the service life of the house, and also affect your own safety. To put it mildly, it affects social harmony, the relationship between neighbors, and the cost of later maintenance increases. It is best to mobilize the upstairs neighbors to do waterproofing together, which is the best care for your new home.

1.If the bathroom is not waterproofed, it is not done well. It will lead to complaints from the owners downstairs. At any time, the owner downstairs will destroy the ceiling.

2.Bathroom waterproofing should be done well. The wall is moisture-proof, and the general height is meters high according to the national standard. Not 30 cm tall. But we advise customers to do the top. Conservative. The waterproofing of the ground requires oil to be waterproof more than 2 times.

3.If you want to press your current situation. The floor needs to be turned over to do waterproofing. Otherwise, make up the waterproofing.

Toilets, bathrooms and kitchens, which are often in contact with water, if they are not waterproofed or waterproofed but the waterproof layer is damaged in one place, the water will easily leak downstairs, and water stains will be formed on the downstairs ceiling, and dripping water will damage the downstairs decoration and home, affecting the neighborhood relationship, causing property claims and legal disputes.

In addition, if the waterproofing is repaired after leakage, the cost is about 3-5 times that of waterproofing before the renovation.

If you don't do it now, you will do it again if you miss it in the future, and the cost will be higher!

Upstairs shower, downstairs rain.