-
Anonymous users2024-01-24The design of the pipeline is unreasonable, and the pipeline has dirt after a long time.
-
Anonymous users2024-01-23In order to say that their products are good, many manufacturers take care of reducing water consumption, (for example, they should use 6 liters, but use 5 liters, etc.), but the results do not achieve their results. There is also dirt in the pipe after a long time, and it does not achieve the expected effect.
According to what you said, it is most likely not "poor pumping", but "poor drainage" and "poor drainage". Because: "the water in the tank can be drained at one time" means that the pumping is normal, and if the pumping is not clean, it cannot be discharged, the drainage is slow, and there are many dirty things, which cannot be washed away. >>>More
It could be the reason why the sewer is a little clogged.
The "whirlpool" must be divided into two parts: the "whirlpool" and the "vortex". >>>More
Let's see if the triangle valve below is closed.
There are two situations of water leakage in the water tank, 1: the outlet valve is leaking, the inspection method is to close the water inlet triangle valve, if it has been leaking, it is the leakage of the water outlet valve, just see whether the seal is deformed, or there are impurities; Another situation is that the button does not pop up, open the water tank lid to make it pop up, generally there is debris stuck, just clean it. 2；The water inlet valve is not closed tightly, the water has been added to the water tank, the water flows out from the overflow port, and the water inlet triangle valve will not flow again after the water inlet valve is closed, but the water in the water tank is still full, you can judge that there is a problem with the water inlet valve, and this situation can clean the valve seal.