-
Anonymous users2024-01-24If it is mass production, the most appropriate way is to reduce the board and furniture parts to a scale into a template, and then combine the furniture parts and templates on the plate template to find the best solution. I wish you success.
Note: Don't forget to add the loss of the saw path.
-
Anonymous users2024-01-23We are here I designed with a single (manual) software is still not easy to use, there is an audit, I check the order after the order, the reviewer will check it again and then from the blanking to the hole of the master will take a slight look, especially the hole of the master, the basic process of the hole is to review a list. Unless it's the wrong one
The length, width and height of each thickness are added together to classify the plates of the same thickness. Then measure their length, width and height, and you will know how many thicknesses and how many boards to use for this table. As shown in the figure below:
Panel furniture cutting is divided into two ways: manual sliding table saw cutting and CNC equipment cutting. CNC blanking equipment is divided into two categories: electronic saws and engraving machines, electronic saws can only cut materials, but can be overlapped with multiple boards, suitable for mass production; The engraving machine can only place a single board, but it can complete drilling, grooving and milling at the same time, which is suitable for customized production.
Custom-made furniture? Now there are very few free software, all of them are paid software, and the current free ones are better to use Cool Home Le Wardrobe cabinets can do anything, simple to operate, easy to learn, and realistic drawings.
The order splitting function of furniture software can only generate the processing information of the plate, that is, the position, width, length and depth of the groove, if you want to command the equipment to mill the groove, you must also have the machine docking function, different brands and models of equipment are different, can not be generalized.
The most important requirement is that the size must be right, and then the leather field is the selection of materials, and the good and secondary materials on the front and back are distinguished, and then it is the shirt grip grinding or bucket material, do not delay the production of the next process. You can take a look at the post bar "Buy Furniture", which has a post about your detailed professional question, which should be helpful to you.