-
After the carpentry is done, polish and clean up the dust.
Repair furniture putty, caulk and eye patching, or batch ash priming (I use A brand furniture putty), after the putty is sanded, clean up the dust, and you can spray paint.
Basically, this process is for reference.
-
What is putty I only know putty.
Generally, the best wet grinding time is the hour after scraping (water grinding polishing, which can only be sprayed after the water vapor is dry). 2 to 3 hours is the best dry grinding time. After sanding, the surface dust is removed, and subsequent operations such as spraying middle paint, top coat, and overprint varnish can be sprayed. >>>More
The needs of automobiles are adhesive to metal iron plates and aluminum plates. Low viscosity requirements for furniture. >>>More
First, polish the furniture with sandpaper, then adjust it with stone high and glue, scrape it on the furniture with a gray knife, and then polish it, apply primer and then paint.
Water-based A-brand putty is definitely better than putty, no need to mix, open the barrel and use it directly.
It is not necessary that the putty under the water-based putty should be dried thoroughly, then polished, and then water-based. >>>More