Toilet drainage renovation problem

To prepare floor drains, sewer pipes. The specific method is as follows: 1. There is a floor drain in the place where you want to take a bath, as the main floor drain, which is the lowest point of the whole bathroom, 2. The sewer pipe of the wash basin, the sewer pipe of the washing machine, if there is a bath room, the sewer pipe of the bath room, and the sewer of the toilet are generally not changed.

You're talking about secondary waterproofing, and I suggest you should do it. >>>More

This is not easy to operate, do not move the original tile, it is not easy to do, but I don't know which part of the drainage you refer to, is it possible to add an extra pipe, if it is a sewage toilet, it can't be done, rent a house, without the owner's consent It is best not to move, the trouble is very,

First of all, consider whether the above branch pipes have a simultaneous drainage process, if there is no DN50 pipe is absolutely insufficient, it is recommended to thicken to DN63 (PVC) pipe or thicker. As for the phenomenon of oil pollution plugging pipe, it is difficult for PVC pipe to occur, because the surface finish of PVC pipe is very good, and it is easy to dredge, easy to construct and low cost, so it is the preferred material for water supply and discharge. If it is connected to the DN100 pipe, the main pipe after the confluence of the three branch pipes above also needs the DN63 pipe, which is more certain.

If this transformation is definitely to use a 45-degree elbow, because it is not to demolish the wall but to slot, it is in line with the specifications, which will not affect the quality of the main project of the house, but the water pipe connector must be sealed with glue to avoid water leakage.