-
Anonymous users2024-01-24According to the above phenomenon, there are three scenarios for analysis; 1。Bulb quality issues. 2.Poor line contact. 3.Power supply issues. Check them separately and it should be normal.
-
Anonymous users2024-01-23The bulb is in poor contact with the lamp head, just twist the bulb after the power is off (be sure to disconnect the total power supply, safety first). It could also be a switch issue, and it is not recommended to do it yourself.
If there is a property to find a community electrician to solve the problem, this is his job.
Again, safety is the most important thing.
-
Anonymous users2024-01-22The bathroom is damp most of the time, and there is steam in the usual bath, which leads to residual water vapor at the lamp mouth, and it will be temporarily connected after the power is turned on. It is recommended to leave the small window of the restroom open.
-
Anonymous users2024-01-21When the line burns out, it often flashes a few times, which generally occurs at the joint.
Caused by poor contact or poor contact at the main switchboard, main switch and leakage protection!
The switch is loose, just tighten it.
If it doesn't work, swap the zero line of the line of fire. >>>More
The wall is hollow, and it is easy to fall off after a long time, because the adsorption force on the back of the brick is not enough, and the brick on the top is pressed, and the porcelain will collapse or explode for a long time, resulting in falling off. It is better to modify the protruding wall surface a little.
Generally, the property is only responsible for the maintenance of public facilities. But there are plumber masters in the property engineering department, and they will fix these problems like you said. You can talk to them, pay a little fee, and ask them to help fix it.
If there is no short circuit or open circuit, try changing to an air protection switch.