The bathroom wall tiles and floor tiles are not well handled, there is a gap of about 1cm, and I wan

Updated on Bathroom 2024-08-03
5 answers
  1. Anonymous users2024-01-24

    It is recommended to wet the gap and fill it with pure cement powder, which can be put a little more. After there is water on the surface of the cement, you can also put a little cement powder, and then use your fingers or something smooth to outline the cement into a smooth arc, which can be used after a day.

  2. Anonymous users2024-01-23

    Simple treatment method 1, with caulk treatment, not beautiful 2, with the edge strip treatment is the floor of the kind of strip, after the completion of the can also be not perfect, the final treatment method 3, cut the tile quickly, put a door stone, the price is not high and looks beautiful.

  3. Anonymous users2024-01-22

    1CM is a little wide, and the glass glue can be hit I don't know what color the floor of your house is, if it is a light color, use white cement, if it is colored, you can use grout. If you use glass glue, use porcelain, white, black, don't buy transparent, and pay attention to buy a good one, alkaline, acidic, it will be particularly pungent, the smell is particularly strong and toxic.

  4. Anonymous users2024-01-21

    1cm, can be filled with white cement, putty powder, etc.

  5. Anonymous users2024-01-20

    Glue with glass is cheaper.

    The trim is good-looking and expensive.

Related questions
2 answers2024-08-03

There are very narrow colored bricks in the building materials market, with a width of 1 cm to a few centimeters, you calculate the distance first, go buy some back, and inlay it there. It is not only beautiful, but also solves your troubles.

4 answers2024-08-03

Beauty sewing agent.

The gap of the tile in the toilet can be used with the beauty joint, which can play the role of filling, and the beauty joint can also play a good role in waterproofing, so that the tile is not easy to leak after the perfect seam. >>>More

1 answers2024-08-03

Tile paving without seams is a practice that does not meet the requirements of construction specifications. This will lead to problems such as cracking, chipping, porcelain dropping, loosening and falling off of ceramic tiles. When the above problems occur, the fundamental solution is to replace the tiles. >>>More

3 answers2024-08-03

It must be re-done, you can use Guoerjia's Jutu You, this is quite suitable for family waterproofing

2 answers2024-08-03

Use caulk, also known as caulk or grout, to fill the joints between tiles or natural stone that are attached to the wall or floor. It can solve the problem of poor adhesion and waterproofness of cement grouting.