How to decorate a lighting store? The main thing is how to do the ceiling, which is to save money an

Because the lamp model hanging in the ceiling and the wall should be replaced frequently, it is best to use screw-resistant materials, and it is best to use 5*3 wooden keel to make a 300*300 shelf and brush fireproof paint, and then use a 4mm board to make a ceiling bottom plate, and seal the decorative panel. It is best to fix the lamps at the intersection of the wooden keel frame, in order to ensure safety, you can also install iron wire on the wooden keel frame to increase the load-bearing of the shelf.

Due to the different directions of force on the wall lamps, 2*3 wooden keels can be used to make 300*300 shelves and brush fireproof paint, and 9mm boards are used as base plates to seal decorative panels. Because the wall lamps and ceiling lamps on the wall are replaced quickly, the 9mm board will be more resistant to disassembly and assembly screws.

Smallpox: 160 yuan*100=16000;

Wall: 100 yuan * 80 = 8000, low cabinet: 600 yuan * 28 = 16800;

Ground 600 bricks: 80*100=8000;

Wires, switches and sockets: 120*100=12000;

Floor-to-ceiling glass windows on the façade: 120*25=3000;

Glass door: 1*2000=2000;

Bathroom: Unknown.

Mezzanine (if the floor is high enough, a mezzanine can be added for the warehouse): It is unknown that the above is an estimate of the unit price of simple decoration, and there is a price difference between labor and materials in various places, which cannot be completely accurate.

PS: Recently, the fire department attaches more importance to the fire protection problem in public places, and the decoration that does not meet the fire protection requirements will be suspended for rectification and punishment, so it is necessary to use fireproof plywood to do the decoration of public places, and the light steel keel must be used, and the light steel keel must not be used in the place, and the wooden keel must be brushed with fireproof paint.

The woodworking board is made, and the ceiling should be made of iron and wood wheels. Make it sturdy. The walls should be made green, and now they are all environmentally friendly!

The investment is about 100,000 or more. Crystal lamps can be a bit more expensive. If you want to make a general ceiling lamp, you don't need any good wooden wheels.

The top must be a woodworking board. There is no light on the screw, and it is easy to change places and put on the screws.

The lighting shop must have a suspended ceiling, depending on your floor height, a higher top can be used as a warehouse, and then look at the type of lamps, if there are large crystal lamps, etc., the keel should be solid, otherwise the lamp will fall down very seriously, and the plate will also be selected according to the load-bearing, and the lamps and lanterns will not be too thick. If you save money, you don't have to do styling, you can hang it flat.

You find a decorator to design on the spot, and then visit other people's stores to find a plan that meets your requirements.