-
I had to smash the tiles and start anew.
-
I'm afraid this can only knock out the wall tiles, and then shorten the spacing by adding the right elbow to the water pipe. It is estimated that two face bricks will be knocked out, and a maximum of three. Because it is a freshly pasted brick, it basically has no effect on the appearance.
First remove the moving bar of the surface-mounted mixing valve, take off the cover, then fix the base on the wall, connect the water pipe, and then buckle the cover, and you can do it.
That's a short circuit in the socket in the bathroom, and if you turn off the main gate, there should be no power, so of course you can push it up. Suggestion: Find a plumber to check the wiring of the bathroom for you.
Hello can't be broken, the handle can't be touched, the inside is the valve core If it's broken, it's broken, and it's okay at the time. At most, the screws at the handle and spool are loose, so don't worry.
Two showers and two washbasins.
It's all a mixture of hot and cold water. >>>More
The power supply is connected to the middle, and the four control lines are connected to L1-L4