-
Anonymous users2024-01-24THE STATE HAS UNIFIED REGULATIONS THAT THE SPACING OF OUTDOOR RAILINGS IS NOT MORE THAN 110MM (ALL PARTS ARE THE SAME), THE HEIGHT IS NOT LESS THAN 1050MM, THE HEIGHT OF MIDDLE AND HIGH-RISE BUILDINGS IS NOT LESS THAN 1100MM, AND THE SUPER HIGH-RISE IS NOT LESS THAN 1200MM
THE NET SPACING OF THE COLUMNS IS NOT MORE THAN 1100MM.
If you are doing it at home, you must pay attention to the thickness. Because it's about security.
The load-bearing design of the balcony is generally KN per square meter, and the load-bearing capacity of the balcony is about 200 kg per square meter. The ends of the balconies are also allowed to carry 1 kn per square meter, as the ends of the balconies can also carry 100 kg of concentrated load per linear meter. The load-bearing range of the balcony is divided into two kinds, one is the self-esteem of the balcony itself, and then the balcony increases after the change into the middle, the national implementation of the balcony load-bearing design standard is 250 kg per square meter, more than this standard will bring potential safety hazards.
The light steel keel is 75
Ceiling gypsum board is a centimeter. >>>More
According to the national standard: the height is, and the spacing between the face tube, vertical rod and cross bar is 10 cm. >>>More
Anhui Mingxin Metal Products Co., Ltd.
1.The distance between the bottom surface of the wall cabinet and the ground is generally about 1.6 meters, depending on the situation. Generally, the height of the base cabinet is about 800 850, and the countertop is 750 from the bottom of the wall cabinet, which is the standard range of the height range of the range hood from the gas stove. >>>More