Water seeps through the toilet partition wall

Updated on Toilets 2024-08-14
4 answers
  1. Anonymous users2024-01-24

    1. Remove the bathroom floor tiles and wall tiles, and let the waterproofing be done from scratch. 2. Buy a piece of frosted glass directly, stick the glass to the wall, and the wall over there will seep water, just stick it there, buy a bottle of glass glue, and glue the glass with glass.

  2. Anonymous users2024-01-23

    It's not as simple as you think! Provide free professional technical consultation for concrete waterproof leakage repair!

  3. Anonymous users2024-01-22

    It turns out that the finished shower room is used to prove that the wall has not been waterproofed, and the plugging king will definitely not be able to manage for a few days, so you still replace it with a finished shower room.

  4. Anonymous users2024-01-21

    Only a finished shower room with a base is preferred.

Related questions
Water seepage from the sanitary partition wall
3 answers2024-08-14

First, check whether there are pipes in the wall, and if there are pipes, check if there are leaks. >>>More

What happens to water seepage at the foot of the partition wall of the sanitary partition
1 answers2024-08-14

The sewer pipe is generally in the bathroom.

This phenomenon indicates that there is a water leak upstairs. >>>More

What should I do if there is water seepage between the bathroom and the partition wall of the room?
2 answers2024-08-14

It is estimated that the waterproofing of the bathroom is not done, and the water seeps into the wall, so you can only wait for the wall and the ground to be completely dry, and re-do the waterproofing in the bathroom, and the waterproof layer should extend from the ground to the wall, 250MM higher than the ground, and the height of the waterproof layer of the bathroom by the shower head wall shall not be less than 1800MM; THE WATERPROOF LAYER OF THE COATING FILM IS EVENLY BRUSHED, THE GENERAL THICKNESS SHALL NOT BE LESS THAN 1 5MM, THE WATERPROOF SURFACE OF THE COATING FILM IS NOT BLISTERED, NOT FLOWING, SMOOTH AND CONCAVE, AND IT IS BEST TO DO A 24-HOUR WATER STORAGE TEST AFTER THE WATER IS DONE TO CHECK THE INTEGRITY OF THE WATERPROOF LAYER. After confirming that there is no problem, rebuild the wall and floor.

The balcony and hall partition wall of the rough house are leaking water, how to deal with it
1 answers2024-08-14

Do waterproofing on the front water.

Dig the best permeable waterproofing can be done by yourself. >>>More

How to crack the partition wall at the head of the bed against the toilet
9 answers2024-08-14

The partition wall doesn't matter much, you never know how the neighbor's house is decorated.