How to install solid wood flooring?

1. Check the ground.

The installation of solid wood flooring sounds very difficult, in fact, it is not, first of all, for the installation of solid wood flooring, it must be checked before doing a good job, check whether the ground is flat, the various high and low values of the surface of the ground should not differ by 3mm, and the ground should be dry and tidy, or leave a little impurities, the test method is to lay several films on the ground that needs to be installed on the floor, seal well, after about 12 hours, to see if there is water vapor and some impurities in the film small particles attached to it, if not, This means that the ground is dry and clean. Before installing the floor, the floor must be placed at room temperature for 48 hours to ensure that the floor adapts to the temperature and humidity of the environment, and the size of the floor will not be too different due to thermal expansion and contraction during installation.

2. Start construction.

The construction method of floor installation is to adopt the tiling construction method, and the distance between the floor and some fixed objects such as walls and columns should be left with a length of about 9mm, and when paving, it is necessary to ensure that each floor needs to be staggered by 30cm for paving, so that it looks very beautiful. When paving, a layer of floor mat with a thickness of about 2mm is now laid on the ground, which is made of high-density polyethylene, and the interface needs to be sealed with tape, and then a layer of film with a thickness of more than is spread on the ground, and then reconnected to more than 50mm at the joint, and finally sealed with tape. When paving, it should be paved from the wall of the room, and the distance between the floor and the wall should be reserved for a gap of about 9mm, and the excess part after each row of paving the floor must be sawed off with a saw.

When paving the last row, it is necessary to measure the width of the last row very accurately, accurately remove the excess floor, then pave it with a retractor, and finally install the baseboard in the reserved place.

3. Cleaning is completed.

The final step, of course, is to clean the residue from the series of work that has just been carried out on the flooring, and then to clean the entire floor.

Precautions for the installation of solid wood flooring.

Whoever buys the flooring will install it.

Try to let the business that sells the floor provide paving services, otherwise when there is a problem with the floor in the future, the seller and the construction party will shirk their responsibilities with each other, making the problem difficult to solve.

1.The size of the keel wood should not be too thick, otherwise it will affect the use of space.

2.Cement nails can not be used, but should be hammered with electricity and then driven into the ground with wooden wedges and screws.

3.After the keel wooden fang is installed, it will not move left and right, and there is no need to fix it with cement mortar around it, so that the floor will not be arched or tiled and deformed due to insufficient maintenance time.