-
Anonymous users2024-01-24This may be the case that the wires of the heat lamp are short-circuited and the wires are burned, which is why the power switch will jump as soon as you connect the heat lamp. You're going to have to change the whole light.
There is a problem with the bathroom lamp, and the zero line of the fire wire is connected wrong, open the junction box to see and separate the zero line.
Does your home's power switch have leakage protection? If there is, see if the square button of the test jumps out If it jumps out, it means that your bathroom light zero wire and ground wire are reversed Do an experiment Remove the light bulb in the bathroom When the light is turned on If the light is turned on normally, it means that the judgment is correct If the test button does not jump out, then it can basically be said that there is a short circuit Check the bathroom switch light line lamp head Whether there is a short circuit in the place.
It is very likely that one of the two wires on the lamp head is loose and comes out and hits the other wire, or the water in the lamp head is too wet to cause a short circuit. You can unscrew the lamp head cover and find the cause to rule it out. >>>More
That's a few LED lamp beads burned out, and there are two reasons: >>>More
First of all, there must be a problem of short leakage, you should be on the line of your bathroom, find an electrician to check it in detail, and the second is that the leakage protection switch of your home has far exceeded the capacity of the floor and the whole building, so your home will not jump, according to the normal configuration should be your home jumped first.