How to calculate the ceiling area

Generally speaking, the area calculation is suitable for the falling ceiling (that is, the ceiling above the second level or the modeling ceiling), and the area obtained by the circumference (extension meter) * (vertical plane + horizontal plane length) is the area.

Horizontal ceilings are length and width = number of areas.

The lifting ceiling is (length and width) + the starting part (height and length 4) = the number of areas.

Generally, it can be calculated based on the room clearance area. For multi-storey ceilings, there are some differences from region to region.

It can be calculated by projected area or by area. If it is a linear reflective roof, it is calculated by area, and the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, and the area of the ceiling is calculated, in fact, it is the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.

It can be calculated using formulas.

The algorithm is = (length + width) ceiling width + (length + width) height of sagging.

The calculation rules of the general ceiling are as follows: the ceiling keel of all kinds of ceilings is calculated according to the clearance area between the main walls, without deducting the area occupied by the partition wall, inspection holes, chimneys, columns, buttresses and pipes, and the ceiling decorative surface layer is calculated in square meters according to the area of solid nails (glue) between the main walls, and the area occupied by the partition wall, inspection holes, chimneys, stacks and pipes is not deducted, but the area occupied by the above holes, independent columns, lamp troughs and curtain boxes connected to the ceiling should be deducted.

Answer 1, according to the area calculation, mainly suitable for the drop ceiling, that is, the second level or above the ceiling or the shape of the ceiling. If it is a straight reflective roof, it is also calculated by area. The calculation method is to use the circumference of the four sides (extension meters) * (length of vertical plane + horizontal plane), and the area obtained is the area.

2. Calculated according to the projection area. The specific calculation method is to add the bottom surface (the size of the distance between the ceiling and the roof) and multiply it by the total length to get the area of the ceiling.

Suspended ceiling refers to a kind of decoration for the top decoration of the living environment of the house. To put it simply, it refers to the decoration of the ceiling, which is one of the important parts of interior decoration. The ceiling has the functions of heat preservation, heat insulation, sound insulation and sound absorption, and is also a hidden layer for electrical, ventilation and air conditioning, communication and fire prevention, alarm pipeline equipment and other projects.

Ceiling area: (length + width) Ceiling width + (length + width) The height of the sag. The area around the ceiling:

(Inner perimeter + outer perimeter of the ceiling) 2 The distance between the inner edge and the outer edge is the area of the required materials, and the cost of the ceiling is generally calculated separately. If there is a light strip, the cost of the light strip needs to be calculated separately.

Generally speaking, the area calculation is suitable for using the area of the falling ceiling (that is, the second level to tremble on the ceiling or the modeling ceiling), and the circumference (extension meter) * (length of the vertical plane + horizontal plane) is the area.

The area means the area where the sealing plate is located. For example, the 600mm wide ceiling has a virtual light trough, and the rent Wang falls 200mm from the top surface, and the edge of the light trough is 100mm. The indoor circumference is 5000mmX3500mm, and the area of the ceiling is:

Differential rock 600mm+200mm+100mm) X [(5000mm+3500mm-1200mm)X2 sides] = 900mmX 14600mm =13140000mm2 = square meters.

The calculation of the ceiling surface area is the area of the width multiplied by the length plus the area of the façade.

An ordinary suspended ceiling is its area by multiplying its width by its length.