-
Anonymous users2024-01-24For a general gas water heater, 10-12 liters is enough. Two bathrooms are generally 12 liters, if you want to use the bathtub often, then it is recommended to 12-16 liters, if the hot water pipe is arranged relatively long, too much, then choose a larger one, 16 liters.
-
Anonymous users2024-01-23My house also has a kitchen and two bathrooms, and I use 20 liters, which is enough. Of course, if you choose to use a larger number of liters, you will experience better results.
-
Anonymous users2024-01-22If the site has the conditions, you can consider the solar electric heating water heater, which can put all the hot water out, without worrying about the situation that there is no hot water for a while, and can be dispersed to multiple water points to supply hot water, and no electricity is needed when the sun is big. The premise is that there is a place to install the water heater and there is enough sunshine. It is recommended that you buy a thermostatic type bathtub.
The temperature is not high and the route is too far! The reason for the low water flow is that there are debris or the reduction of the pipe diameter caused by the construction process.
Dear, my family is also like this, my family has a bathroom and kitchen is in one place, the other bathroom is in the master bedroom, between the two dining room and living room, so far away. And the bathroom in the master bedroom is the kind of darkroom without windows, so I measured it, my kitchen is an gas water heater, the kitchen and bathroom are shared, and the master bedroom is an electric water heater, so safe, because don't bury a long gas pipe. In terms of practicality, the electric water heater does not consume as much electricity as I feared. >>>More
There is a kitchen and two bathrooms in my house.
There is a kitchen and two bathrooms in my house. >>>More
There is absolutely no impact, and the side houses of our buildings here have two windows, one to the east and one to the north. So there is absolutely no impact on the host.
The wires are not connected, open the panel and test it clearly. Reconnect it, tighten the screws on the binding post, and check that the wires are not connected incorrectly. The live wire is connected to L, the neutral wire is connected to N, and the ground wire is connected to E.