-
Anonymous users2024-01-24There are those who sell wall-cleaning tools in the market, just dip some washing spirit. This kind of PVC ceiling can be wiped with a hot towel with detergent. Rub with a soft cotton cloth dipped in 50% alcohol.
Do not use steel wool balls, which will wash off the coating on the PVC ceiling. Metal gussets, such as easy to seep into dirty things; PVC is easy to eat and change color. You can wipe it with a detergent to see if the effect will not be very good.
Or use a damp cloth to put toothpaste on the wipe and then wipe it with a clean, dry cloth to dry it.
PVC material is a kind of plastic decorative material, is the abbreviation of polyvinyl chloride material, PVC (Polyvinyl Chloride, referred to as PVC) resin is a thermoplastic polymer polymer polymerized by vinyl chloride monomer (Vinyl Chloride Monomer, referred to as VCM). It is made of polyvinyl chloride resin as the main raw material, adding an appropriate amount of anti-aging agent, modifier, etc., through mixing, calendering, vacuum blister and other processes. PVC is an amorphous polymer containing microcrystals with a crystallinity of 5%-10% (melting point 175 degrees). >>>More
Wash it with Mr. Vermeer in the kitchen, let me wipe it clean with a damp rag, PVC gusset discoloration is due to long-term heat or sunlight exposure to accelerate aging, generally after a few years has been aged hard and brittle.
What material is your ceiling made of? If it is an aluminum buckle, you can wipe it with a wet towel, and then wipe it with a newspaper, you only need to wipe it with a damp cloth, because the gusset itself is smoke-proof, and it is generally good to clean it up in a month. >>>More
Under normal circumstances, we will choose the buckle plate in the kitchen to be painted more, there are a few with brushed, that is also a good process in the roller coating, not many people in order to save money when the film board, the former cleaning because it is in the kitchen, there will be oil stains, then use a small amount of dish soap on it, but there should be enough water to mix, to use a softer, better absorbent cloth to scrub after water, it doesn't matter if you can use force in the middle, but when you are around, the force should be light. In particular, pay attention to not hard cloth and cleaning balls and the like, as soon as you scrub it, it will leave a lot of small wires on the shiny panel, damaging the gusset, at this time, if it is a roller coating, it is not good, if it is a film, it is not good. Another point is that if you use the kind of cheap differential plate, heavy one, then be careful, because it has a lot of iron components in it, not an aluminum-magnesium alloy gusset, so after seeing water, it is easier to rust. >>>More
No, the folding door still has a certain weight, and it must be made of a keel as a track.