-
Anonymous users2024-01-24No, wait until the waterproof layer is completely dry before carrying out the water storage test, if the waterproof coating is damaged, it needs to be done again
-
Anonymous users2024-01-23The waterproofing of the toilet is very important, it is generally best to use waterproof paint to do 2-3 times, and to dry quickly and then do, after doing the waterproof dry to test the water, the water test time should be slightly longer, confirm that there is no leakage in order to continue the follow-up work.
After the toilet is waterproofed, it can be covered with floor heating for about half a month. At this time, the waterproof materials have all dried, and you can install underfloor heating facilities.
No, it won't take long for the waterproof to fall off. There is usually no such way.
It should be filled evenly, otherwise the waterproof layer will be damaged.
According to Jingguang Huayi's many years of design experience, this is not the reason for waterproofing in this unusual situation, it may be the quality of the brick, or it may be the cement mortar problem, usually the brick needs to be shoveled and then replaced! Good luck!
The common causes of honeycomb after waterproof coating are as follows: >>>More