What to do if the bathroom door can t be closed

It is the door that cannot be closed due to the expansion and deformation of the door due to moisture, which has a certain relationship with the quality of the door. You can first measure the difference, if the difference is very small, you can repair the door frame, if the door leaf is shaking, it may be that the upper and lower seams are not ordinary due to loose loosening, you can adjust the loose.

The screw is loose to remove the hinge on the door and install it again, the main thing is that the hinge on it is best to replace, he may be pulled loose, you shake the door, is it loose pulled. If the lower part of the door is not stuck on the ground and will not get stuck, you can reinstall the side of the lock. Because the door can't be closed, the two parts of the lock can't be pulled together, so you remove the side of the buckle and align it with the other side before installing it.

1. You can use a hexagon wrench to loosen all the screws on the door first, and you need to choose a 5mm one. 2. After loosening all the screws, you can pull the door down, and you can make a certain gap between the door and the door frame. Then you can close the door from the inside, see if the door can touch the door frame, if it can touch, it means that the distance between the two hinges is relatively large, and the door should be pushed inside; If you can't touch it, it means that this location is more suitable.

3. Then you can use bolts to fix the upper and lower sides of the door frame, and then close the door after fixing it to see if it is suitable, if there is no problem, you can tighten the remaining screws.

Specific issues and specific amendments. The door won't close, probably because the door frame has been deformed, causing it to sag. In this case, the door frame can be removed first, and the sunken part can be broken with the planer used in the carpentry, and then the door frame can be reinstalled.

If the door does not close because the screws are loose, find the loose screws and retighten the screws. If there is a problem with the hinge and hinge, replace the hardware accessories with new ones, and then drip lubricating oil, and the switch will be free. Regarding the problem of door sinking, you can also use a wooden wedge, choose a small molded wooden block, and stuff it directly into the gap under the door, which can prevent the door leaf from continuing to sink.

In addition, adjust the hinge again, which can solve the problem of not being able to close the door.

If it is caused by sagging, you can first remove the door frame, use a wound to create the part that has sunken, and select a molded wooden block to plug it into the gap under the door. If the door cannot be closed due to loose screws, find the loose screws first, and then retighten the screws. If there is a problem with the hinge and hinge, replace the hardware accessories with new ones and then drip lubricating oil.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

2. After loosening all the screws, you can pull the door down, and you can make a certain gap between the door and the door frame. Then you can close the door from the inside, see if the door can touch the door frame, if it can touch, it means that the distance between the two hinges is relatively large, and the door should be pushed inside; If you can't touch it, it means that this location is more suitable.

3. Then you can use bolts to fix the upper and lower sides of the door frame, and then close the door after fixing it to see if it is suitable, if there is no problem, you can tighten the remaining screws.

It must be that the door is damp and deformed, so it can't be closed, this is when choosing the door of the bathroom, there is no thoughtfulness, if the bathroom is a whole bath room, you can choose a solid wood door or a composite door, because the shower room will block a lot of moisture, so that the door will not be damp. If it is not a whole bathhouse, it is best to choose a molded door or a plastic steel door, which is more resistant to moisture.