-
Anonymous users2024-01-24Infrared sensing, after sensing that an object appears and disappears, it will generate a signal to trigger the flush.
-
Anonymous users2024-01-23Floats. After the water in the tank rises to a certain height, the valve will automatically release the water when the float is opened.
-
Anonymous users2024-01-22It is an infrared sensor valve that controls the flushing.
* Motherboard adopts digital circuit, digital transmission, 16-bit digital is more accurate. >>>More
Solution: (1) P gh = 1 103kg m3 10N kg F Ps = 5000Pa 60 10-4m2 = 30N (2) F full floating V full discharge g = 1 103kg m3 (400 10-4m2 >>>More
This is a kind of toilet cleaner, deodorizing, disinfection and sterilization, preventing the toilet from hanging stains, this is such a thing.
All use a floating controller to switch the water source on and off. The old-fashioned use of floats.
The principle of automatic flushing of toilets:
There is a float valve inside, as the water level in the tank rises, the buoyancy generated by the float increases, and when the water level rises to a predetermined value, the buoyancy generated by the float will be transmitted to the plug that discharges the water through a seesaw structure, and the plug can be automatically pulled up as long as the drain button is pressed. After the water is discharged, the plug automatically returns to its position under the action of the spring and enters the next round of water filling cycle. >>>More