-
Anonymous users2024-01-24If you choose tiles for the bathroom, you should determine the size according to the size of the bathroom. If the bathroom is large, choose 600*600, if it is smaller, choose 300*300, generally choose the latter. Bathroom tiles should generally be chosen smaller than the living room.
-
Anonymous users2024-01-23First of all, the wall tiles should be covered. Tiles resist moisture erosion, protect the waterproofing of walls, and are easy to keep clean and beautiful for a long time. Families with suspended ceilings should pay attention to the part of the suspended ceiling should also be covered with tiles in order to protect the entire wall.
Floor tiles should be of non-slip texture. Generally, matte or shallow concave floor tiles are very suitable for slippery floors after bathing to protect the owner from slipping and injury. The floor of the bathroom should be 10 20 mm lower than the floor of the other rooms.
When laying tiles, it is necessary to consider the location and size of the floor drain. Usually, the floor tiles are laid with a slope of 1% leakage, and the floor drain is the lowest to facilitate drainage. The joints of the floor tiles should be of the same thickness and align with the joints of the wall tiles.
-
Anonymous users2024-01-22entrances to the professions
The selection of bathroom tiles is equally important, so what is the right size of the tile cavity for the bathroom? Wu accompanies you. >>>More
It depends on personal preference, generally on the ground, because you need to consider the installation of floor drains, toilets, etc., too large tiles are not convenient to process, generally should not be greater than 300mmX300mm, small points are also OK, the wall, can be big, generally choose a slightly larger point, too small, it will fall later, not very good-looking.
Floor tiles are generally used 300 * 300 wall tiles depend on the area of your bathroom and your personal preferences The general specifications of wall tiles are 200 * 300, 250 * 330, 300 * 450, 300 * 600 If the area of the bathroom is relatively small, use 200 * 300 or 250 * 330 specifications of wall tiles, but 200 * 300 specifications are rarely used now, if it is decoration to rent, you can use 200 * 300 specifications, The use of 250 * 330 specifications for living in your own house The bathroom area is generally or relatively large, you can use 300 * 450 specifications or 300 * 600 specifications 300 * 450 specifications are now conventional specifications, generally used more, if the bathroom area is relatively large and want to decorate more high-end, you can use 300 * 600 specifications of imitation marble wall tiles. >>>More
The floor tiles are generally 30 cm * 30 cm, and the wall is 30 * 45
There is no specific standard for size, but the main one is based on the size of the bathroom area; as well as the decoration style is determined. >>>More