Can the toilet position be moved?

Some owners are not very satisfied with the layout in the bathroom, so they want to change some, but they are worried that the toilet in the bathroom will affect the normal use after it is moved, so can the toilet position be moved? Let's find out with me.

Can the toilet position be moved?

1. Generally speaking, the toilet cannot be moved, because there are generally many problems after the toilet is moved. If the owner must move the toilet, then it is necessary to use the toilet shifter, re-punch the hole, raise the ground, change the sewer pipe and other methods to move, so as to avoid problems after the toilet is displaced, affecting the normal use.

2. If the distance of toilet displacement is relatively short, within 10 cm, then a special toilet shifter can be used to shift. When using a toilet shifter for lifting, you must be cautious, otherwise it is easy to cause the toilet to become clogged.

3. If the distance of the toilet displacement is relatively far, and there is no backfill layer on the ground, or the height of the backfill layer is less than 30 cm, then the sewer of the toilet needs to be moved, and a large elbow needs to be installed at the top of the sewer in the owner's house downstairs, so as to avoid the blockage of the pipeline.

4. If the indoor house height is high enough, then the toilet can be moved by increasing the ground height. That is, add a pipe to the ground first, so that the old pipe is led to the position that needs to be moved, so that even if the toilet is displaced, the pipe will not be blocked. If there are elderly people or children in the house, then it is best not to do this, because the ground is increased, which will inevitably form steps, so it is easy to cause people to fall when they go to the bathroom.

The above is a detailed introduction to the location of the toilet, I hope it can help friends in need. There are many ways to move the toilet, and you can choose the appropriate lifting method according to the actual situation of your bathroom and your own economic ability, so as to avoid problems.

You can turn it, and if you want to move, you have to redo the sewer pipe. It is necessary to plow the ground, lay pipes, do waterproofing, and lay bricks. It's the equivalent of reworking the bathroom.

Yes, with a disposer. But it can only move 10cm, and if you can, you can try not to move. It is easier to clog with that.

1. Generally speaking, the toilet cannot be moved, because there are generally many problems after the toilet is moved. If the owner must move the toilet pants, then it is necessary to use the toilet shifter, re-hole, raise the ground, change the sewer pipe and other methods to move, so as to avoid problems after the toilet is displaced, affecting the normal use.

2. If the distance of toilet displacement is relatively short, within 10 cm, then a special toilet shifter can be used to shift. When using a toilet shifter for lifting, you must be cautious, otherwise it is easy to cause the toilet to become clogged.

3. If the distance of the toilet displacement is relatively far, and there is no backfill layer on the ground, or the height of the backfill layer is less than 30 cm, then the sewer of the toilet needs to be moved, and a large elbow needs to be installed at the top of the sewer in the owner's house downstairs, so as to avoid the blockage of the pipeline.

4. If the indoor house height is high enough, then the toilet can be moved by increasing the ground height. That is, add a pipe on the ground first, so that the old pipe is led to the position that needs to be moved, so that even if the toilet is displaced and cracked, the pipe will not be blocked by the business trip. If there are elderly people or children in the house, then it is best not to do this, because the ground is increased, which will inevitably form steps, so it is easy to cause people to fall when they go to the bathroom.

The above is a detailed introduction to the location of the toilet, I hope it can help friends in need.

The toilet position is movable. Generally, it needs to be determined according to the actual environment and situation, and it can be moved if the conditions permit, and there are three ways to move the toilet, the first is to raise the ground, that is, to build a platform directly under the toilet, which is suitable for long-distance displacement. The second is the shifter, which is the most commonly used method and is very simple to install, but it is only suitable for short-distance lifting.

The third is to change the wall row and change the toilet to the wall, this method is more complicated, and the original ground pipe needs to be removed and reinstalled for drainage, so when changing the location of the toilet, you must plan in advance.

The toilet position can be moved.

The toilet must be in a good position before installation, so the specific installation location must be determined in order to install it correctly. So can the toilet position be moved, if the position needs to be replaced, it also depends on the specific situation of the toilet pipe.

How to move the toilet position:

1. Use a shifter.

When installing the toilet, if you find that the position of the toilet and the drain cannot be corresponded, resulting in the inability to dock, you can use the shift, the shift on the market is 2cm, and the longest shifter is 3m. The only situation that can be handled with a shifter is when the pit distance is too long or too short, and if you want to use a shifter, you must first paste the tiles, so that it is less likely to break.

2. The method of using the ground elevation.

Many people prefer to use the method of raising the floor when dealing with the problem of toilet displacement. On the one hand, this can bury the pipe connecting the toilet in the ground, which is good for aesthetics; On the other hand, a slope can be designed to allow the excrement to flow down the pipe better.

3. Adopt the method of re-punching.

If the toilet is relocated by re-punching, it is necessary to rectify the drain pipe of the toilet so that the water pipe can go down the wall, and the toilet should be in the back or bottom row. The advantage of this method over raising the ground is that it does not need to bury the water pipes, and it can also deal with the problem of pipes well.

The toilet can be relocated.

If you only need to move about 10cm, you can use a toilet shifter, remove all the toilets, connect the shifters to the ground drains, and install the toilets.

If the toilet needs to be displaced on a large scale, you can raise the ground, add a new pipe to the original ground, transfer the original nozzle to the place that needs to be moved, and finally install the toilet and do a good job of waterproofing the ground.

Toilet installation precautions

1. Before installing the toilet, pay attention to check the sewage pipe, see if there are mud and sand and other stains in the pipeline, and check whether the toilet installation position is flat.

2. For the location of the toilet outlet, a special flange for the toilet should be installed, which should be evenly matched with the sewer, glued all around, and the gap between the toilet and the wall should be uniform to ensure that the placement is correct and stable.

3. After the toilet is installed, it is necessary to pay attention to the correct water level, smooth flushing, and stable toilet lid.

It is generally not suitable for moving, and a slight movement may cause the toilet to become clogged frequently.

1. Generally speaking, the toilet cannot be moved, because there are generally many problems after the toilet is moved. If the owner must move the toilet, then it is necessary to use the toilet shifter, re-punch the hole, raise the ground, change the sewer pipe and other methods to move, so as to avoid problems after the toilet is displaced, affecting the normal use.

2. If the distance of toilet displacement is relatively short, within 10 cm, then a special toilet shifter can be used to shift. When using a toilet shifter for lifting, you must be cautious, otherwise it is easy to cause the toilet to become clogged.

3. If the distance of the toilet displacement is relatively far, and there is no backfill layer on the ground, or the height of the backfill layer is less than 30 cm, then the sewer of the toilet needs to be moved, and a large elbow needs to be installed at the top of the sewer in the owner's house downstairs, so as to avoid the blockage of the pipeline.

4. If the indoor house height is high enough, then the toilet can be moved by increasing the ground height. That is, add a pipe to the ground first, so that the old pipe is led to the position that needs to be moved, so that even if the toilet is displaced, the pipe will not be blocked. If there are elderly people or children in the house, then it is best not to do this, because the ground is increased, which will inevitably form steps, so it is easy to cause people to fall when they go to the bathroom.

The above is a detailed introduction to the location of the toilet, I hope it can help friends in need.