-
Anonymous users2024-01-24Regarding the waterproofing of the bathroom, I can give you the following suggestions::
1.The first thing to pay attention to when doing waterproofing in the bathroom is the choice of waterproof materials, and it is recommended that you can directly use the waterproof slurry in the kitchen and bathroom, which is specially developed for the yin and yang angles that are easy to seep into the kitchen and bathroom, wear pipes, sanitary ware, floor drain peripherals, etc., so the special materials are dedicated, the pertinence is stronger, and the waterproof effect is of course better.
2.The construction of waterproofing should be carried out in accordance with the requirements of the manual, the proportion of waterproof materials, the standard thickness and height of construction, etc., so as to ensure a good waterproof effect.
3.After doing a good job of waterproofing, it is necessary to do a good job of sprinkling and maintenance in the later stage, and places with direct sunlight need to be covered and covered.
4.The base surface before waterproofing must be cleaned, there can be no oil and dust, etc., and it must be sprinkled with water to moisten, but there must be no stagnant water.
5.After the waterproofing is completed, remember to do a 48-72 hour closed water test to check whether there are any leaks in the waterproof construction and whether the waterproof function is normal.
-
Anonymous users2024-01-23Waterproof leakage should be done three times, the floor needs to be paid attention to, and the location and level of the floor drain need to be tested and determined.
As we all know, it is very troublesome to do waterproofing badly, and the new real estate developer has done a certain amount of waterproofing in the bathroom, but often the original waterproof layer will be destroyed after the construction, so we still need to do the waterproof layer. Some friends are not buying a new house, but a second-hand house, as long as they do not damage the waterproof layer of the bathroom, they generally do not need to redo the waterproof layer. >>>More
Pay attention to the root and corners of the pipe first painted with waterproof plugging treasure, and finally painted with waterproof coating. The best material is to use the polyurethane waterproof coating of the national standard product to paint the ground waterproof and the wall to paint the waterproof mortar.
1. Choose the right waterproof material.
Before doing waterproofing, it is necessary to choose the right waterproof material, if the waterproof material is not suitable, this will not only cause material waste, but also directly affect the waterproof effect. At the same time, we should also try to choose high-quality waterproof materials, so that the quality of the product is more guaranteed, and the service life is longer, while the inferior waterproof materials are cheap, but the service life is shorter, and it is easy to leak problems. >>>More
1. The bathroom floor is leveled first. If you're replacing the floor tiles in the bathroom, be sure to level the floor with cement mortar before waterproofing it after chiseling off the original tiles. This avoids leakage of the waterproofing coating due to uneven thickness. >>>More
Be sure to verify whether the goal of waterproofing is achieved.