Ask for help The exhaust fan cord in my bathroom is broken, and I want to remove the shell and repla

Updated on Bathroom 2024-08-04
5 answers
  1. Anonymous users2024-01-24

    You take the cone and try to pry it off from the four sides, if there are no screws to fix it, it should be able to open, pay attention to the safety of the power stop.

  2. Anonymous users2024-01-23

    To cut off the power first, and then unscrew the outside screws.

  3. Anonymous users2024-01-22

    My family is also pulling the rope to break inside, and then it took a long time, and finally I have to push the fan blades out in the center, and it's done! (The rope will rot quickly, and the quality control is not strict, Golden Antelope).

  4. Anonymous users2024-01-21

    The partition wall ventilation fan is to remove the mask and the shroud first, and then you can see the junction box, pull the cord to see if it can be connected.

    Pay attention to power off, if the plastic parts are damaged, the only way is to replace the plastic parts.

  5. Anonymous users2024-01-20

    This is an old mosaic type, and now it is basically an airflow louver!

Related questions
3 answers2024-08-04

According to the person in charge of an exhaust fan sales office, there are three types of household exhaust fans on the market: ceiling type, wall-mounted type and window type. Zhengye GENUIN, BNN-LONON, Panasonic Panasonic, Midea Midea, Jinling These are the top 10 brand portals to buy the exhaust fan industry brand list introduction, you can go to understand, or buy a better brand.

2 answers2024-08-04

Installation method: 1. The exhaust fan installed on the aluminum gusset ceiling is equipped with metal fasteners matching the ceiling keel, which can be installed directly; 2. Installed on the outer wall of the bathroom, the hole should be opened in the wall first, and the hole diameter should be determined according to the size of the exhaust fan. 3. Installed on the wall of the exhaust pipe reserved in the bathroom, it needs to be equipped with a check valve to prevent odor crossing, and it is also necessary to punch holes with an impact drill and fix the expansion screws.

1 answers2024-08-04

Remove an aluminum plate and make an exhaust fan bracket on top to fix the exhaust fan installation.

2 answers2024-08-04

Is it windy when you hold on? If anything, it's that the pull wire switch is broken. The pull wire switch is dual-purpose, one is to open the outer cover, and the other is to turn on the power! >>>More

1 answers2024-08-04

It is best for the exhaust fan to have convection air, this kind of thing is worth what you pay for (of course, excluding being cheated) It is best to press two and two exhaust ports for dry and wet separation, and finally all belong to one exhaust fan. If the bathroom.