-
Anonymous users2024-01-24Method 1: Use white cement and water to make a thin mud, then scrape the gap with a plastering knife (scrape the gap to fill it), wipe off the excess material with toilet paper or an old towel, and it can be done after 24 hours.
Method 2: Use caulk, also known as caulk and caulk, to fill the joints between tiles or natural stones attached to the wall or floor. It can solve the problem of poor adhesion and waterproofness of cement grouting.
If the color of the tile is light, use white cement, and if it is colored, use grout. If you use glass glue, use porcelain, white, black, don't buy transparent, and pay attention to buy a good alkaline.
Acidic ones can be particularly pungent, smelly, and toxic.
If the size of the wall tiles and floor tiles are the same (at least the size of one side is the same), you can seam it, the seam is more beautiful, but it is also more expensive to brick, it is recommended that you can see the place to the seam, and the place where you can't see, such as the inside of the cabinet or under the refrigerator, you can not use the seam, anyway, you can't see it.
You can brush the waterproof paint first, and then use the grout to hook the seams!
Beauty sewing agent.
The gap of the tile in the toilet can be used with the beauty joint, which can play the role of filling, and the beauty joint can also play a good role in waterproofing, so that the tile is not easy to leak after the perfect seam. >>>More
If the amount of time and the dark corner of the wall are too large, you can use mold-proof sealant to seal, which can play a waterproof role.
What to fill the gaps in the bathroom tiles can be waterproof, and the joint material must be selected to ensure that the bathroom does not leak.