-
Anonymous users2024-01-241. The sanitary ware has been used for a long time, and the rubber stopper may be too hard to match. Maybe it's because the plastic drain isn't smooth after a long time. Or maybe the water level of the tank is not enough and there is no pressure. It is recommended to change to a new set.
2. Confirm whether it is a float failure or a water outlet plug failure, you can move the float by hand, feel the force, and see if the water is still out of the water, or see if the water leakage is from the upper overflow or from the lower part of the overflow. The upper part is floating, and if you can't reach the height of the overflow, it has little to do with floating, you need to check the Pisai mouth to see if there is something like free scaling, you can open Pisai and clean it up with your hands.
3. You can also apply a little butter along the drain, and then there is a leakage that may be caused by the loosening of the overflow.
You buy a siphon toilet with a hole at the bottom that needs to be covered with a rubber plug before installing.
Some of them are caused by the problem of water alkali, try to use some vinegar or the like, and first dissolve the alkali, which can be better.
Restrooms in space are also gravity-free. When going to the toilet, it is necessary to sit on a well-designed toilet. The person floats in mid-air, puts his feet into the fixed leg cover first, ties the waist with a seat strap, and holds the handle with his hand (otherwise, because of the reaction force, the poop will fly as soon as the person is sprayed......） >>>More
It should be a small mouth.
It is the rubber plug used, the water tank is to use the principle of water drop, so that the water is washed down from the water pipe from a height, from potential energy to kinetic energy, the dirt is washed away, the pull rope of the water tank is usually on the side of the water tank, connected to the lever of the starting rubber stopper.