6. Flat bathroom lighting, the bathroom is generally not equipped with switches

Definitely have to install a switch! When the socket is installed, the surface-mounted socket should not be less than one meter from the ground; The concealed socket is not less than one meter from the ground, and in order to prevent children from being electrocuted, touched with fingers or poked into the hole of the power supply with metal objects, a safety socket with a safety flap must be selected; The construction wiring requirements of the single-phase two-eye socket are: when the eyelets are arranged horizontally, it is "left zero and right fire", and when it is arranged vertically, it is "upper fire and lower zero"; The wiring requirements for a single-phase three-prong socket are:

The grounding eyelet at the uppermost end must be firmly connected, solid, and paired with the grounding wire, and must not be unconnected. The remaining two eyelets are wired according to the rules of "left zero and right fire", and it is worth noting that the neutral line and the protective grounding wire must not be misconnected or connected as a whole; Refrigerators should use a separate, three-prong socket with a protective ground. It is strictly forbidden to connect the grounding wire to the gas pipeline to avoid serious fire accidents; In order to ensure the absolute safety of the family, the socket of the range hood should also use a three-eye socket, and the protection of the grounding hole must not be taken lightly; The toilet is often used to take a bath and take a shower, which is easy to get humid and should not be installed with ordinary sockets.

Bathroom switches are generally installed outside.

Generally, it is installed on the outside, and if it is installed inside, it must have a moisture-proof (waterproof) protective cover.

It's installed on the outside, and it's so humid inside that it's easy to get electrocuted.