-
Just turn on the router on your face wirelessly.
-
Just buy a blink home router, connect to a broadband interface, and set up PPPOE dial-up Internet access. A library tutorial is recommended for connecting to install settings.
-
This should consider how the network line in your home is wired, and it depends on where the other network broadband port in your bedroom is connected, and you connect that end to your router, so that you can access the Internet at this end of your bedroom.
Since there is a network cable in the bedroom, then use this network cable to connect this 150M one! What else do you need to bridge!
Once connected, log in to the router line, set up the wireless there, and then add the password for the wireless connection to prevent others from using it.
I suggest you buy one for a desktop machine.
Source wireless card, very cheap. In this way, you can use a wireless network card to share the network, and you can use wifi sharing software; >>>More
Of course, you can, 1, you make sure that the network cable of the network port of the bedroom has been correctly connected to the LAN port of the main route2, the subordinate router installed in the bedroom, first enter the settings, turn off the DHCP function 3, after the setting, use the network cable from the bedroom network port to the LAN port of the secondary router.
You don't need to reset the settings, just put the router to the optical modem and plug in the cable. If the signal is still not good, it is recommended to change to a router with higher power.