-
Anonymous users2024-01-24Use a wallpaper knife to scrape off the glue on the bottom of the toilet, remember the bottom, and use a knife to scratch it.
-
Anonymous users2024-01-23Use a paper cutter to scratch the place where the toilet bowl is glued a few more times and it will be cut.
Hello, Xiaohai, a home expert, is happy to answer for you. The inlet valve screw can not be screwed 2 methods as follows: 1, the valve can not be screwed can be treated with white vinegar and loosening agent, spray white vinegar or loosening agent on the rotating part of the valve, wait for the rust to be decomposed, you can twist the valve, if the above method is not good, you can knock the valve, let the rust stain loosen, so as to smoothly twist the valve. >>>More
To give you a very simple and very fast way, if you tear off the surface with a lot of adhesive residue, you can spray the surface with exterminator, and then use something to gently scrape, wipe it with paper and it will be very clean! The effect is very good, and if you have the "WD40" industrial cleaning and conditioning agent on hand, it is also very good.
Generally, there are two nylon screws that connect the fixed part of the toilet lid to the lower part of the toilet body, and you will see that if you loosen the nylon nut, you can remove the toilet seat assembly. If you really can't find it yourself, then ask after-sales service to solve it, it won't cost much.
If the float valve is stuck, open the upper cover of the toilet bowl, pull the float up into place, check the cause of the stuck dead point and clean the dirt in the tank. Working principle: after pressing the flush switch, due to the drop of the water level, the float falls at the same time, when the float reaches the lower limit, the water injection switch is turned on, and the water is automatically loaded, although the water level rises, the jacking is lifted by the water, when the float reaches the upper limit at the same time.
Are you a flush toilet? If so, then the float is broken, and the float is broken, and the switch that is equal to the upper water level (that is, the key that automatically closes after the water reaches a certain position) is broken, so the water inlet cannot be terminated.