What to do if the toilet is blocked by Chinese medicine slag, and now the water is very slow

If it is a slow drain, then the toilet is not completely clogged, and you can try to unclog it with simple tools.

The method is as follows: 1. The most common way to pass the toilet is to buy a leather bowl, press it hard for at least two minutes against the toilet outlet, let it form a vacuum, and then dial it up hard and quickly, and repeat it several times to dredge.

2. In the absence of any tools available, you can find a broom, tie an old piece of clothing at one end, and then put a plastic bag on the outside of the clothes and press it against the toilet or sewer outlet, and then pull it to achieve the same effect as the toilet plug.

3. Pour a basin or half a bucket of hot tap water from waist height into the toilet basin. The reason for pouring water from waist height is because this high level of water can help unclog blockages or wash corrosion away.

The temperature of the hot water is like the temperature of the usual tea, and there is no need to boil the water, because too hot water can break the ceramic. Too little water also doesn't work, because you need to let the water flowing into the toilet or slapping in the blockage rise in temperature. Leave the water and dishwashing detergent on the toilet sink for a while.

Sometimes this can soften and loosen the blockage and then clear it on its own.

4. Find a pipe (the one that can be bent) at one end and connect it to the faucet with a large water flow, and insert the other end into the outlet of the sewer.

5. If the toilet or sewer is not stuck by large items, use a long clip (the kind like scissors) or a curved hanger to clip (hook) the items out.

Finding a property dredge is very simple, charging 30 yuan to 50 yuan.

The toilet is blocked by traditional Chinese medicine slag, and now the water is very slow, which is really troublesome, because it affects normal life, but don't worry about it.

In fact, the easiest way is to add appropriate water to the toilet, and press the leather bowl at the toilet mouth with the help of a certain force of water.

Of course, you can also buy some caustic soda to boil water, melt the caustic soda and pour it into the toilet, after chemical reaction, the dirt in the toilet bowl will be corroded, wait for ten minutes and then rinse it with clean water.

At the same time, you can also use a good quality plastic water pipe, one end of the tap water and the other end of the toilet mouth into the toilet mouth, and then block the toilet mouth with rags and other things, and then turn on the tap water, which will use the water pressure to dredge the pipe, the effect is good.

If the above methods are not able to solve the problem, then it is recommended to ask a professional maintenance master to help, they are more professional and should solve the problem quickly.

Whether your toilet flushes or suctions is different in different ways, and you also have to see whether it is blocked on the toilet or in the 110PVC pipe. The general law is not the same; What I said upstairs makes sense, find a property management to get through, human nature will not charge your money, otherwise, there are 20, there are 30, but generally not more than 50, of course, if it is to be disassembled, the price is different,

You try to fill the toilet with water to see if you can go down by pressure, if it really doesn't work, you have to find a master to sit on the toilet.

Looking for wire hooks and hooks, I guess you don't have a toilet plug.