-
1 The lamp is broken (Method: Change the unlit and bright ones to see if they are lit or not, and judge whether they are burned.) )
2. The control line is broken (method: press the switch to see if the light of the same group of switches is not on, if so, the switch has a break point in this line. Inquire and pick up and give it a try,)
-
Check whether the starter is loose and twist the starter.
-
It's burned, and I want to replace the one that started it, and what kind of ballast is it, or the lamp head will burn out.
It's not that your living room light driver has been changed, just go and change it.
Find an electrician, either the switch is not badly dissolved, or the drive is a problem.
Summary. Hello, according to your problem is suspected to be caused by insufficient voltage, it is recommended that you can replace a new transformer, or replace a thicker wire, which can increase the capacitance, and there will be no lights flickering when you use it. >>>More
This is an LED ceiling light that consists of multiple LED panels (yellow rectangular panels). To observe whether multiple light panels are flashing or a single light plate is flashing. There is no ballast, only a controller called a constant current source, and the controllers are likely to be multiple. >>>More
During construction, the power supply distributed everywhere is divided into open lines, your balcony and the bedroom is a power supply, this power supply depends on your situation is to lead to the power cord there is a virtual connection or the wiring is not tightened, or the air switch of this road may be damaged, long-term this will burn out the line, the damage to the refrigerator and air conditioning is also very large, very serious, deal with it quickly.