-
Anonymous users2024-01-24Water seepage: The tiles are not pasted well, resulting in bath and rain faucet water seeping into other places, and the brick joints can be sealed with glass glue.
-
Anonymous users2024-01-23The most radical solution is to re-do the waterproofing, and any later remedy is only a symptom rather than a cure. And according to the relevant national regulations, the waterproofing of the bathroom wall shall not be less than a meter high. Hope it helps!
-
Anonymous users2024-01-22The so-called spraying type and surface brushing type and other waterproofing agents on the market basically have no substantial effect, and generally do not last long. The most direct and effective way to cure the root cause is to re-do waterproofing.
-
Anonymous users2024-01-21If the infiltration is very small, find someone to use the method of injection below, which is also very simple.
-
Anonymous users2024-01-20We often encounter the situation of how to do waterproofing in the later stage, we have consulted similar problems with the professional home waterproofing Lei Bangshi waterproof store, if you do waterproofing on the pasted tiles, the waterproofing agent can be sprayed on the surface of the tile, but this practice is the practice of indicators not cure. At present, the waterproof coating used in the bathroom is before painting and pasting tiles, and it is recommended to use waterproof tile caulking material for tile caulking.
You have to do it all over again, otherwise you'll definitely leak later. Although there is the kind of leakproof on the surface of the brick, it is almost useless, and it is only suitable for small area corner joints.
Cause of water leakage:
Prevent water separation of the BAI water layer. >>>More
Bathroom tile paste bai, tile joints and water seepage, you can use waterproof dao fine joint agent to do waterproof treatment, the specific operation steps are as follows: capacity. >>>More
This is not standardized, I will send you the specification of the wall tiles: determine the layout of the wall tiles, arranged horizontally and vertically on the same wall, and the non-whole bricks should be arranged in the secondary parts or in the dark corners. The width and height of the wall tiles below 10 cm can not be on the wall, the wall tiles should be divided in half, that is, on both sides of the wall at the same time to leave non-whole bricks to maintain the appearance. >>>More
Bathroom water seepage depends on the cause of water seepage, if it is a non-water pipe leakage, that is, to eliminate the water pipe and sewer pipe leakage, that is, the tile surface, tile joints, joints around the ground and the water seepage around the root of the floor drain pipe are collectively referred to as tile surface seepage, the main reason for the water seepage on the tile surface is that the waterproof layer is done during the decoration, and the general waterproof layer problem is mainly from the root of the pipe to the downstairs water seepage, and there is a situation that the bathroom exterior wall is damp and peeling, black and moldy. Non-water pipe leakage can be repaired with Yijia waterproof three musketeer products, no need to plane bricks, directly on the surface of the tile maintenance, after the repair of the tile surface does not have any changes, the tile surface will not become slippery, nor will anything be formed. Walking on it or cleaning will not affect the waterproofing material. >>>More