Generally, the living room light is full LED around the whole light, what is the reason why the midd

Updated on Living room 2024-08-03
2 answers
  1. Anonymous users2024-01-24

    Either the line is not connected well or the ballast on the lamp is broken, and the ballast is likely to be broken! Just buy the same one and replace it.

  2. Anonymous users2024-01-23

    If it's not a problem with the lights, it's a problem with the wiring, check them one by one!

Related questions
What is the problem that the LED light in the living room is half bright and generally not lit
1 answers2024-08-03

Usually because:

1. The power supply inlet voltage is low. >>>More

LED lights in the living room, the surrounding small lights are all on, and the middle screw light f
2 answers2024-08-03

1. Confirm whether there is any problem with the bulb first, and then check whether the wiring has poor contact.

Masters, what is the general size of the ceiling around the living room, medium
1 answers2024-08-03

The width of the ceiling can be between 350 and 450, preferably 400 or 450From the canopy down the normal is anti 120If you have a special shape, or if you use a special lamp, it's a different story.

How thick is the gypsum board used for the ceiling around the living room, and downlights need to be
5 answers2024-08-03

Gypscale for suspended ceilings in general:

Specification size: length: the length of gypsum board on the paper is 2000mm 2400mm 2440mm 3000mm >>>More

The LED living room light is not lit in the first gear, and the second and third gears are on
1 answers2024-08-03

The driver changed to try it, the first gear is white light, the second gear is warm white, and the third gear is white light and warm white together.