How to choose a sofa bed

Comfortable. A good sofa bed is soft, fitting, and bouncy 。When lying down, the body does not feel the heavy pressure.

Even if you lie on your back or side, you will be able to maintain the normal posture of your bones and musclesSprings don't make a sound 。The density of a bad sponge is not enough, the elasticity is low when sitting, and the bed makes noise. Wrap the cloth, i.e. the adhesive force between the fabric and the inclusions.

A good cloth should be flat, and the transition between the armrests and the seat surface and the backrest should be natural and smooth, without wrinkles. Especially where the sofa bed design is curved, carefully observe whether the fabric is smooth. This way you can choose a more comfortable sofa bed.

1. Look at the frame of the sofa.

The frame structure of the sofa should be solid, and the sturdiness of the skeleton determines the service life and quality of the sofa. You can lift one end of the sofa, about 8cm from the ground, to see if the other end is off the ground, if it is off the ground, it means that the skeleton structure is strong. You can also shake the sofa back and forth, left and right with both hands, and if it feels good, it means that the frame is firm.

Then look at the part under the base cloth, there can be no decay, moth-eaten, scars, burrs, etc.

2. Look at the comfort of the sofa.

Sometimes the sofa is a chair, sometimes it's a bed. Therefore, when buying a sofa, it is best to sit on the spot and feel the softness and hardness. Sitting on a sofa that is too hard will cause muscle soreness, while a sofa that is too soft will sink in it and be uncomfortable to sit for a long time.

In addition, the height of the sofa also needs to be referenced, which is generally matched with the height of the coffee table in front of the sofa.

3. Look at the details.

whether you feel uncomfortable after skin contact with the surface of the sofa; Whether the warp and weft lines of the fabric are fine and smooth, no jumping wires, no exposed joints, and whether the feel is tense. The seat and back cover of the fabric sofa should be a looper structure, which is conducive to cleaning; Leather sofas can't have a big smell, which means that the quality of the leather is not up to par, and it is likely to be artificial leather. The sofa brand should be selected as large as possible, so that the after-sales service is more guaranteed.

1. Look at the style.

Since each family's home decoration style is different, everyone should first consider whether the style of the sofa bed can be coordinated with the overall style when buying. There are many kinds of multi-functional sofa beds, and we should choose from the shape, color, pattern and other aspects of the sofa bed, so as to achieve a harmonious and unified effect on the overall style of the room.

2. Look at the size.

Because it has more functions, although it does not take up much space when the sofa is used, it is necessary to use it when we use it as a bed, so I should consider whether it is the right size when buying a multi-functional sofa bed. Although it can be folded, it is also necessary to take into account the space it needs to stretch. In addition, the size of each part of the sofa bed needs to adapt to the curve of the human physiological structure, in line with the principle of ergonomics, so that whether we are sitting or lying, it will be more comfortable to use.

3. Look at the material.

Relatively speaking, the price of this type of sofa is more economical, and the fabrics are mostly fabric-based. Therefore, when you buy, you should not only know its price, but also its fabrics, fillers and accessories. The fabric of the multi-functional sofa bed should not be too slippery, and it is necessary to choose one that is not easy to pill, so that it is more convenient for us to take care of.

The filling material should be sponge and foam, the softness and hardness need to be moderate, and the spring should have good resilience, so that we can feel comfortable when sitting and lying down.

4. Look at the structure.

The internal structure of this kind of sofa is mostly steel structure or wood structure, in order to understand the stability of the sofa, so when we buy, it is best to uncover the lining of its base to check to see the quality of its wood and the treatment of welding and coating. Or we can use our hands to shake the whole sofa back and forth, left and right repeatedly, if it is not easy to shake, it means that the frame is firm and strong. In addition, we can also lie on the sofa bed to feel whether it is comfortable when lying on our back, on our side, and when we turn over, and whether there is noise when we turn over.

How to choose a bed sofa?

1. Frame quality, both hands will shake the whole sofa back and forth, left and right repeatedly, shake it, if the feeling is good, it is clear that the frame is strong. Then discuss with the sales staff, lift the corner of the bottom cloth under the seat and check, if there is no decay, no moth-eaten, no scarring, no bark or wood wool made of shiny hard wood, and the joint between the material and the material is not nailed, but with mortise or notch to bite each other, and then glued firmly, there is no problem.

2. Cushion quality, the bottom surface of the sofa seat and back is mostly made of nylon belt and snake spring interspersed with mesh structure, and the top layer is set off with high-elastic foam, spray cotton and light body foam. This kind of cushion rebounds well and feels comfortable to sit on. Mid-range sofas are mostly made of pressed fibreboard as the seat and back of the bottom plate, which is layered with medium-density foam and spray wool.

This cushion sits on the stiff side and has a slightly less resilient back.

What are the classifications of sofa beds in the living room?

1. Three-turn type: The popular three-turn type has a certain innovation on the basis of tradition, wrapped with a large high-density thick sponge, folded like three neat tofu blocks, and like a delicate single sofa, and then a thick sponge bed, this sofa bed has a bright tone, sharp edges and corners, and the style is more modern, mostly single, suitable for young people.

2. Combined: The modular sofa bed is a set of combined corner sofas from the appearance, some are composed of two completely equal semicircular sofas, and some are composed of several square-shaped sofas. This is a sofa bed that looks like a bed after seeing the change, but because of its bulky size, it is estimated that it is also troublesome to use.

3. Two-fold sofa bed: The two-fold sofa bed is simple in design and use, and it is also relatively common in the market. The bed skeleton and the bed surface of this kind of sofa bed are connected, and there are only four diagonal feet exposed, which is more beautiful, usually just an ordinary couch, and when it is necessary to use, as long as the sofa backrest is pressed back to become a bed, which is convenient.

4. "Lazy" sofa bed: is a big bag, this sofa bed is not keel, need to stand against the wall, if it is spread on the ground, it becomes a simple bed, it is softer than the general household items, and its inner tank can be taken out, easy to clean, this "lazy" sofa bed is suitable for young people who live alone, not only beautiful appearance, but also easy to move, the price is also very affordable.

How to choose a sofa?

1. Look at the name.

Try to choose a good sofa. Its quality is stable, the repair rate is low, the warranty period is long, and the service is guaranteed.

2. Look at the quality of the frame.

Shake the whole sofa back and forth and left and right with both hands, and shake it repeatedly, if it feels good, it means that the frame is firm. If the corner of the base cloth under the seat is uncovered, if it is made of smooth hard wood without decay, moth-eaten, scarring, bark or wood hair, and the junction between the material is not nailed, but is snapped together with mortise or notch, and then glued firmly.

3. Look at the quality of the internal cushion.

The underside of the sofa seat and back is mostly made of nylon straps and snake spring cross mesh structure, which is layered with high-elastic foam, spray cotton and light body foam. This cushion rebounds well and is comfortable to sit on. Mid-range sofas are mostly made of pressed fibreboard as the seat and back of the base, and the upper layer is covered with medium-density foam and spray cotton.

This cushion sits on the stiff side and has a slightly less resilient back.

4. Look at the fabric and sewing.

The sofa fabric should be relatively thick, its gram weight of more than 300 grams of square meters is more durable, and it must be ensured that the surface is not pilling after more than 12,000 times of friction. Sewing should see whether the stitches are uniform and straight, and the seams with both hands should be tightly picked to see if they are tight, and whether the edges of the teeth are rounded.

5. Look at the wrapping cloth.

The wrapping cloth depends on whether the fabric is tightly covered with the inner filling, whether it is flat and crisp, especially the two armrests, the seat and the back of the joint should be natural and free of folds.

6. Look at the choice of foam sponge.

The back pad should use a high-elastic foam sponge with a density of more than 25 kg cubic meters. In order to improve the comfort of sitting and sleeping, some foams are also softened without reducing density, and some are equipped with vertical springs in the cushions to make the sofa have higher resilience and anti-aging performance. Under normal circumstances, it is best to have a recess of about 10 cm in the sofa cushion after the human body sits down.

Floor plan.

According to the situation of your own home, choose, size, opening method, good quality sofa bed will not get up very tired when sleeping, it will be very comfortable, brand good brand sofa bed, its material will be better, use time will also be commonly used Some styles according to the style of their own family to choose Chinese, European, American, you can take a look at Innova Vision, the original Danish brand, exported to the world, brand quality is guaranteed!

This lazy sofa can be tried.

This is the sofa series that matches the lazy.

VERZELLONI'S HISTORY OF SUCCESS.

VERZELLONI IS A COMPANY THAT STARTED IN 1950. VERZELLONI IS ALSO A FAMILY-OWNED COMPANY WITH 60 YEARS OF EXPERIENCE IN THE PRODUCTION OF MATTRESSES AND SOFAS. VERZELLONI is also a team of professionals focused on design, technology and quality.

AWAY FROM NOISE AND EXTREMES, VERZELLONI EMBODIES AN ELEGANCE AND STYLE THAT FOCUSES ON THE NEEDS OF THE MOMENT. VERZELLONI'S "FURNISHING PRODUCTS" SILENTLY BLEND INTO THE SPATIAL ENVIRONMENT AND CONDENSE THIS AUTHENTIC ATMOSPHERE IN A MOMENTARY PAUSE IN TIME.

The VERZELLONI R&D center and the collaborative design studio Lievore Altherr Molina have created products that are full of this style and brought to life in every detail.

VERZELLONI'S PRODUCTS MEET THE QUALITY REQUIREMENTS OF VERZELLONI'S GLOBAL QUALITY COMPANY BROCHURE AND ARE ALSO INTEGRATED INTO THE COMPANY'S MARKETING CULTURE. The company has high standards for its own regulations when it comes to the selection of raw materials, outer materials and details. The company pays great attention to the entire production process, especially to the environment and energy conservation.

In terms of family, style and quality, the VERZELLONI brand also provides users with a safe and reliable guarantee. It is mainly reflected in ensuring the service life of the product and related technical support.