-
Anonymous users2024-01-24It must be that the sewer pipe is not aligned, if it is right, it will not leak without gluing, only realigning the pipe, and then re-gluing.
-
Anonymous users2024-01-23If it is not blocked, it is that the glass glue is not glued well, or the toilet drain and drain are not put in place, it is very simple, remove the toilet bowl and buy a bucket of glass glue to stick it once.
-
Anonymous users2024-01-22If it leaks just after the renovation, it must be that the toilet and the sewer pipe are not aligned. If it takes some time, there is a possibility that the sewer pipe will be blocked.
It is best to use it after 24 hours of drying.
The toilet base is glued with glass, and there will be a peculiar smell after a long time, because he has been soaked in water for a long time, there will definitely be a peculiar smell, and the best solution is to reapply the glass glue again, so that the odor can be avoided, and it is also possible to directly reapply a layer of cement.
If you don't want to get it.
If it is too complicated, it can be used in situ according to the installation shape and size of the toilet to pave a relatively dry cement mortar, and the thickness is subject to the non-protruding floor tiles. Fill the toilet bowl again, flatten it with a little force, and remove the excess cement mortar. After 4 to 8 hours, the surface of the cement mortar is dry, and the anti-mildew glass glue is applied around the bottom and smoothed. >>>More
Glass glue can be used, but it must be done without water, and the tank valve should be closed for at least 24 hours after the glass glue is applied.
Generally, 24 hours is fine, and it is better to have a longer time.