-
Anonymous users2024-01-24That's because the rubber ring inside is broken, or misplaced, and it has to be repaired, otherwise the downstairs will find you sooner or later.
-
Anonymous users2024-01-23Dip a mop to dry water and oil, and make a circle with glass glue (or quick-drying cement).
-
Anonymous users2024-01-22It is recommended that it be repaired.
1. Scrape off the glass sealant on the contact between the base of the toilet bowl and the ground; >>>More
The drain is not adequately bonded to the drain, and the toilet needs to be re-stabilized (with a rubber gasket) to prevent odor leakage.
Let's first understand how the original toilet was installed? >>>More
The bottom of the toilet leaks water, generally speaking, it is the leakage of the metal hose and the toilet connection, the main reason is that the metal hose bursts and then the metal hose and the toilet connection leakage, so it is necessary to replace the metal hose in time. This is that if there is a leak in the place where the metal hose is connected to the toilet, it will need to be glued with some glass glue, if it is too little and too thin, there will be gaps in long-term use. Therefore, in the case of a joint, it takes 24-48 hours and do not use the toilet.
The first thing to see about the toilet leakage is which accessory is the problem, and it is estimated that it will cost more than 100 to replace an accessory, and it will be charged separately for professional installation. Of course, you can buy yourself a pack of plugging agent for ten dollars. If there is a leak on the side of the toilet, it means that the toilet drain is not aligned with the hole in the ground, and it needs to be heightened and aligned, and it also needs about 100 pieces.