-
Anonymous users2024-01-24Since the floor needs to be damaged when replacing the urinal in my bathroom, the waterproof layer of the bathroom floor will also be correspondingly, so the waterproof layer of the ground must be redone, which is also to ensure that it is difficult to repair due to leakage in the later stage.
-
Anonymous users2024-01-23The toilet generally has a water-bearing bend, and the pit distance is about 65. HOWEVER, THERE ARE ALSO STRAIGHT FALL TYPE, 30CM PIT SPACING, BUT THE DRAINAGE PIPE IS REQUIRED TO HAVE A P-BEND WATER-BEARING SETTING. The original toilet renovation of the general drainage pipe without a bend design, so to choose the pit distance of 65, to re-open the ground during the transformation, diameter 160MM.
Removing the original toilet drain pipe and repairing the waterproof with the new hole is more troublesome, and the consent of the downstairs residents must be obtained. Another way is to carry out the same layer drainage construction, that is, to move the elbow in the original toilet sinkhole, but the toilet needs to be raised and a step needs to be built.
-
Anonymous users2024-01-22Abstract Hello! We're happy to answer for you! Need.
The key to changing from a squatting toilet to a toilet is waterproofing and hole spacing. Fill in the ground after removing the old squatting urinal. In addition, the displacement and slotting will definitely destroy the previous waterproofing, and according to the characteristics of the toilet installation, the ground around the toilet will be slightly too high, so before the toilet is installed, it is necessary to do a good job of waterproofing and making a protective layer of cement mortar to prevent subsequent construction from damaging the new waterproof layer.
Does the toilet squatting toilet need to be re-waterproofed when changing from a toilet?
Hello! We're happy to answer for you! Need.
The key to changing from a squatting toilet to a toilet is waterproofing and hole spacing. Fill in the ground after removing the old squatting urinal. In addition, the displacement and slotting will definitely destroy the previous waterproofing, and according to the characteristics of the toilet installation, the ground around the toilet will be slightly too high, so before the toilet is installed, it is necessary to do a good job of waterproofing and making a protective layer of cement mortar to prevent subsequent construction from damaging the new waterproof layer.
Is it to redo the entire ground for waterproofing or just to do it? The place of the toilet is only the place of the toilet bowl.
Hello, I hope it can help you You don't seem to have a solution to this situation, unless the sock cover is you remove the toilet again. Chisel the ground from the position of the lower omen inlet, and then connect the wide rent to rent a floor drain up.
The good stores are all package installed, and the price is around 1000-1500.
Toilets are generally used in private space sanitary ware, like in the family, toilets are directly in contact with sanitary ware, not suitable as public sanitary ware, it is recommended that public places do not use toilets, but squatting toilets.
Nowadays, many people choose to squat the toilet, consider the use of bathroom space, and install a wall seat frame! If the space is large enough, it is recommended to use a toilet, including the installation of washlets, from the perspective of grade, it is natural that the toilet is slightly better than the squatting toilet, and it is more comfortable to use.
Steps to change from squatting to sitting:
1. Smash the squatting stool; >>>More