-
Anonymous users2024-01-24Referring to the quota, there is a wooden keel quota.
Let's convert it according to size.
-
Anonymous users2024-01-23What you said is generally the secondary ceiling of the perimeter circle, the home improvement ceiling is suitable for small scale, the general width is 250 400mm, the height is 40 60mm, "buckle out of the groove" is probably to install T5 lamps or plastic lamps and other internal reflection light sources, the secondary ceiling is generally 100mm in front of the front to facilitate the installation of lamps, the distance between the upper end and the ceiling should be determined according to your specific modeling requirements, but generally should not be less than 60mm, that is, to meet the minimum operation requirements of the painter scraping putty.
Woodworking materials: wooden keel (wood nails and anti-corrosion on-site production), blockboard (special-shaped ceiling), paper gypsum board, iron nails, steel nails, air nails, self-tapping screws, foaming agents, white latex, preservatives (most of the home decoration is not used), etc.
Painter Materials:
Anti-rust paint, caulking paper tape, alkali-resistant mesh cloth, wallpaper knife and blade, gypsum powder, putty powder, white latex, latex paint (or wallpaper), etc.
The construction machinery and tools are provided by the construction team.
The last sentence is not very understood, at least the self-tapping screw tail point brush anti-rust paint sealing.
When installing the decorative gypsum board, it is necessary to coat white latex on the contact surface of the wooden keel and gypsum board, so as to increase the strength of the bond, in addition, we must pay attention to the careful use of air nails, which is to facilitate the installation of gypsum board by workers and play a temporary fixed role, but now workers in order to save trouble and directly use gypsum board and use less or even do not use self-tapping screws, so that it can not be seen at the time, but in the future, due to the lack of gypsum board grip strength and cause the nail position to break the top of the finishing latex paint, forming many small points to affect the appearance, the probability is almost 100.
In terms of area, calculate a ground area, plus the area of the opposite side.
The characteristics of the project should indicate the specifications of the board, such as 600*600, which must be a square board; Indicate 3000*100, which is not negotiable. >>>More
As we all know, there are many links in decorating a house, and the ceiling is a very important part of it. There are many kinds of materials for the ceiling, so how much is the difference between the cost of the gypsum ceiling wooden keel and the light steel keel? What are the precautions for home improvement ceilings? >>>More
Gypsum board with its lightweight, fireproof, sound insulation and other excellent performance, is widely used in various types of interior decoration, at the same time, because of the inherent characteristics of gypsum board products, in the high temperature and rainy season after the construction of the ceiling deformation to the construction of the construction staff headaches, or decoration after one or two years, wavy deformation makes consumers feel very helpless. The deformation of gypsum board is caused by poor construction environment, cross construction, poor ventilation, no protection of product preservation at the construction site, and non-standard construction; on the other hand, the performance characteristics of gypsum board itself; First, the ordinary gypsum board city is long and empty, with large porosity, easy water absorption, and water absorption rate of more than 50%; Second, the softening coefficient of ordinary gypsum board is low, only left and right. >>>More
The yin corners are attached to the wooden keel and the wall, and then fixed to the wooden keel with screws or nails. It should be a question of how to install the last ceiling panel, right?