Kitchen drain pipes with traps more and more oil stains are formed at the traps downstairs

Updated on Kitchen 2024-08-13
3 answers
  1. Anonymous users2024-01-24

    If you are sure that it is oil, then you boil it with boiling water and pour it slowly, most of the oil will soften or wash away, I estimate that pure oil stains cannot be stored, it may be scaling, then boiling water is not good, if the pipe is strong enough, you can get some oxalic acid.

    After pouring it with boiling water, pour oxalic acid into it, and then wash away the acid and dissolved residue with water after half a day.

  2. Anonymous users2024-01-23

    It can't be oil, right? Miscellaneous items are exact.

    If there is a hole in the elbow, smash it open and clean it and seal it back with cement.

    Or ask the dredger to dredge it.

  3. Anonymous users2024-01-22

    Find a master and accompany you to buy PVC pipes. Then glue the pipe with PVC glue and install it. The original sewer pipe was discarded.

    This thing is either leaking or clogged. There are a lot of problems. In our case, we all make our own drainage pipes with PVC pipes.

    In this way, even if the kitchen faucet is broken in the future, the PVC pipe is easy to remove. It's not as fragile as the original, and sometimes it leaks when you touch it.

    And there is an anti-odor bucket for kitchen drainage, which is the easiest to block here. If you must use it, you need to unscrew it frequently, take out the garbage, and then put it back in.

Related questions
1 answers2024-08-13

It can be used by going through a back-water bend, but this is more difficult to get through. You should have one piece of pipe on one side of the hose on the back bend so that it is higher than the height of the other side of the horizontal pipe. Then wrap the hose and sewer nozzle tightly around the interface with waterproof tape.

2 answers2024-08-13

You have been using it, you use it when you drain it, you have the right to use it, but if it is broken, you are also obliged to repair it.

2 answers2024-08-13

You definitely need to connect the water bend.

Add a section of PVC pipe to the trap and connect it with the PVC head to make the actual diameter of the pipe smaller, the contact between the PVC pipe and the trap is closed with glass glue, and then the hose can be plugged directly into the PVC pipe. If there is a gap around the tube, it can also be closed with glass glue. >>>More

2 answers2024-08-13

Generally, it is installed in the kitchen, and the distance between the septic tank is relatively long, and the anti-odor effect is not ideal. The smell of the pipes between the trap and the kitchen cannot be prevented.

5 answers2024-08-13

It depends on whether you modify the sewer pipe when you decorate the house, and if you don't modify it, you are not responsible.