Frameless glass balcony hot bending glass bursts, what should I do?

1.What he promised was tempered glass, that's good, tempered glass has self-explosion characteristics, it is inevitable, and he must reinstall it for you. (Well-known domestic glass companies are generally free patches, and small workshops are not easy to say).

2.Promising tempered glass, but installing hot-bending glass, is to deceive consumers, you can complain about this.

3.Hot-bent glass is not tempered, nor is it considered hot tempered, and it is certainly not a problem caused by self-explosion. There are only a few reasons for that:

a. Caused by external impact, from your situation, you will definitely not tell him that it was caused by yourself; b. Thermal bursting, because the thermal shock resistance of hot-bent glass is even worse than that of ordinary glass, and it is easy to burst; c. Product quality defects, the internal stress of the glass is extremely uneven, which is easy to cause explosion. d. There are errors in the installation, which makes the internal stress of the glass extremely uneven, resulting in crackage.

You are dealing with him mainly on the grounds that are in your interest in my article 3.

This is basically not tested, you can only see if he can provide 3C certification and test reports, etc.

For the sake of beauty and safety of use, it is recommended to find a maintenance master to replace it.

The biggest feature of frameless glass door is that it has no consolidated frame around the door leaf (glass) because it is different from ordinary doors such as aluminum alloy doors and plastic steel doors. The frameless glass door is almost completely transparent, so it lets in light and can be used in any combination. It is generally used in shopping malls, hotels, offices and other places.

You still have to ask this question, didn't I tell you last time, you don't care about what the master of the installation said, you catch the person who packs your decoration work, as long as you don't give money, it depends on how you negotiate with others, the installation is completely shirking responsibility, you just need to catch the person who lives you, you and the workers below, you can't get him, he has more experience in dealing with the owner every day than you.

The state of hot-bent glass after breaking is basically the same as that of ordinary glass, and the crack lines on the glass will gather at one point, then this point is the burst point. If there is no impact on the inside and outside of the glass at the blasting point, then it is a self-explosion, and if it is a self-explosion, you can contact the manufacturer to make a piece.

Glass self-explosion is a very tricky problem in the industry, there is no way to deal with it, and then yours is hot bending is not tempered, there is a difference in nature, see where it lies, is it a problem of installation.