How to repair the impure water of the toilet tank

1. Check whether the flush switch is reset. The plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. Generally, the switch can be reset by repeating it several times. >>>More

, the water inlet valve does not enter the water (1), check whether the tap water pressure is too low. (2) Check whether the filter screen of the inlet valve is blocked by debris. (3) Open the inlet valve cover and check the sealing ring in the inlet valve body.

4 "It's bad at the place, it's good to replace one, if it's a new one, you can find a dealer, if it's too long, turn off the triangle valve, they will provide door-to-door repair, that is, something connected to the water.

The toilet plays a very important social role in daily life, although it is not a lofty role, but without the toilet, you have to live and you can't continue. 1.First of all, open the toilet tank, and let's see what level the scoop inside the tank is at when it is full. >>>More

There is no picture can only roughly talk about the inspection and maintenance procedures, close the angle valve, open the lid of the water tank, such as the water does not stop, from the middle hole to the toilet water, that is, the water door is broken, if the water can be stopped, the water flow slowly to the toilet, see if the plugged chain is too close or stuck, whether the circumference of the plug is damaged, look at the damaged parts, according to the original model to replace the new one,