Solutions for misplaced toilet pits

Whether it's a bidet toilet or a squatting toilet, there is a trap underneath it, which is designed to seal off the smell of overflowing sewers. So, you can't see the sewers. The situation you described is likely to be that there is a foreign object in your trap, or it is possible that the diameter of the horizontal pipe between your squatting toilet and the sewage pipe riser is too thin when you install it, or the slope is not enough, or even backward, so it will often be blocked, and you should check which cause it and then correct it.

The purpose of the fulcrum activity is to adjust the water level. >>>More

You buy a siphon toilet with a hole at the bottom that needs to be covered with a rubber plug before installing.

It must be in the upper middle position, huh? The float is mainly used to control the height of the water consumption of the water tank.

Find the reason, first look at the main sewer of the building, if you are squatting to sitting, it may be caused by a total of two elbows of the toilet and squatting sewer, this you want to find the property to knock off the elbow of the main sewer and change it to a straight pipe, or change the toilet. Or maybe the elbow of your toilet is blocked, don't throw foreign objects into it. Then there is the lack of flush water pressure, and if the siphon is necessary, it may have to be replaced with a straight row