-
Anonymous users2024-01-24When you press the crystal lamp in the living room, you must use an electric drill to drill the hole, it is very likely that it is too deep to drill the floor heating pipe upstairs, because now the floor heating has stopped, and it is normal for some rhinestones to burst out of it.
It is also possible that a water pipe was drilled through the roof of the living room. However, this is a relatively small chance.
Now if you remove the water pipes, then wait for a few winters to come to the floor heating to see if the upstairs floor heating leaks.
It doesn't matter if you don't miss it. If it leaks, it's a bit of a problem.
-
Anonymous users2024-01-23The threading pipe is broken, which is generally the case in new houses. There will be some water in the threading pipe during construction.
-
Anonymous users2024-01-22Four eyes with a crystal lamp? Or where did you hit four eyes?
The home decoration is selected as medium, and the volume is not large, about more than 2,000.
It should be a slightly more ornate one with a living room.
When you turn on the crystal lamp in the living room, a bulb does not light up after a bang, don't change the bulb in a hurry, there may be a short circuit in the circuit. Find out the cause first, and then think about changing the bulb. First look at whether there is a short circuit in the wire near the lamp head, or the wire on the lamp head is loose, and the two wires are connected together.
Material, whether it will change color, type of light.
Not good, so that the whole top will be short, feel oppressive, and easy to bump over.