How to replace the toilet seat of Weilang when it is broken

First, remove the fixing bolt at the back of the toilet bowl to remove the damaged toilet seat. When installing, pay attention to the reverse direction. Most toilet seats are installed with two bolts adjusted.

It is worth noting that when buying a toilet seat, it is best to measure the size in advance, determine the distance between the screw holes, the width and length of the toilet seat, and then buy a suitable toilet seat.

Second, if the screw cap is fixed, you must first find the screw cap, and replace it with a new one after removing it. The location of the screw cap is not easy to find, some are in the light, some are in the dark. Most of the screw caps in the dark will be on the side of the water tank in the toilet, and after opening the lid, put your hand into it, and touch it upwards and in the direction of the water tank, which should be able to be touched, but it is not visible from the outside.

3. In addition, the installation method of different styles of toilet lid will be slightly different, generally at the bottom end of the toilet lid, connected to the position of the toilet, and the back is screwed up with screws, and the screws on both sides can be unscrewed by reaching down with your hand, so that the entire cover can be taken off directly.