Can you directly lay the solid wood floor on the concrete floor without hitting the keel?

Updated on Solid wood 2024-08-14
4 answers
  1. Anonymous users2024-01-24

    The shop can be paved, and the first floor is right, just pave the moisture barrier.

    But there are no absolutes, if your concrete floor or indoor humidity is relatively large, it is recommended to arrange the keel.

  2. Anonymous users2024-01-23

    Nowadays, not all solid wood floors need to be keeled, and there is a moisture barrier.

  3. Anonymous users2024-01-22

    The tidal barrier is OK.

  4. Anonymous users2024-01-21

    In your home, the height difference was filled with cement, and then leveled and laid 12mm laminate flooring, right?

    This situation is more troublesome, there are 12mm solid wood on the market, but it is relatively rare. You can search for it online.

    Bell Floor, Home, The Beginning of Dreams].

Related questions
Whether the solid wood floor can be laid directly on the floor tiles
7 answers2024-08-14

Absolutely. When the old house is renovated and laid with a solid wood floor, the original ground is directly drilled and the keel is pressed, but it should be noted that the original magnetic baseboard needs to be knocked off, or it is not very good-looking, and it can be replaced with a wooden baseboard. There must also be a problem with the height of the door, so if it is not replaced, the door will need to be sawed.

Can hardwood flooring be laid directly on the blockboard without a keel?
4 answers2024-08-14

It is best not to use woodworking boards, because after a long time, the wood in the woodworking board will also be loosened, and the best is to use a good multi-layer board with the same thickness of the multi-layer board, the quality and safety performance is much stronger than that of the blockboard, and according to the actual situation of your home, there is no need for keel, directly lay solid wood floor.

Can the hardwood floor be laid directly without a keel?
2 answers2024-08-14

1. Disperse deformation stress: because the solid wood floor is a wood object arranged in the single fiber direction, which is very easy to deform, so the laying direction of the solid wood floor and the laying direction of the keel should be perpendicular when laying, and the purpose is to stagger the constraint to disperse the expansion and contraction stress of the solid wood floor. >>>More

Can hardwood floors be laid directly on the floor tiles
2 answers2024-08-14

Yes, it is very important that the wooden floor is paved flat, and the flatness of the floor tiles is generally good, so there is no problem.

If you don't hit the keel, how to lay a solid wood floor
2 answers2024-08-14

The keel must be beaten, and it must be leveled!

It's okay not to nail, but to spring card @ >>>More