The bathroom has a beam drop plate 3cm, how to lay gluten

The adjacent plate of the partition wall is three centimeters lower, the hanging mold is more than 20 centimeters, and the height of the area begins to be calculated, and the height is calculated from the bottom.

You can pass or not, it mainly depends on what kind of requirements you have for the bathroom, and women have high requirements for the bathroom.

The bathroom slab is generally lowered by about 100, and the surrounding beam height is generally greater than 200, so that even if your floor slab is 100 thick, the slab is still within the support of the beam, that is, the support of the beam or the slab. As for the negative reinforcement, of course, it cannot be penetrated with the adjacent slabs, because the elevation is different and cannot be penetrated, so the negative reinforcement can be considered to extend into the beam.

The beam that passes through the bathroom is lowered by 30, and the beam around the bathroom is not lowered (similar to the edge banding beam), so that it can be connected with the structural floor.

This belongs to the folding plate, not the reverse beam, there is an edge standard method in the standard atlas, of course, you can also add a secondary beam to solve the problem of the falling plate.