-
Anonymous users2024-01-24It is recommended to use a shifter. Even if you don't use a shifter, it's easy to block small brands. It mainly depends on whether the current height is suitable for the shifter, and if it is suitable, use the shifter.
It should be said that the big brand of things, the water flow is fierce, rinse it clean, it is good, although the shifter is used, it will not be easily blocked if you think about it.
FYI.
-
Anonymous users2024-01-23It's best to solve the problem all at once, otherwise it may cost you more later. This is taught by a lot of blood. In the decoration, we must not be greedy for trouble and small profits.
-
Anonymous users2024-01-22There is a gap between the size of the original pit and the current pit, so it makes sense to worry about whether to change the toilet or not
1. After all the tiles are pasted, the center of the sewage pipe is 40 cm away from the wall, if it is a blank brick (the center of the pipe is 44 cm away from the wall if the mortar powder wall is not made.
As long as the pit distance is installed in the toilet, the pit distance is the wall on the back of the toilet, and the center point of the drainage outlet is measured.
It depends on where you have been, so let's ask the logistics company specifically.
A 330 toilet is required.
GENERALLY, THE WALL SPACING OF THE LOWER DRAIN TOILET IS DIVIDED INTO 305MM, 330MM, 400MM AND 420MM, AND MOST OF THE TOILETS ON THE MARKET ARE 305MM AND 400MM. Generally, the toilet wall distance is smaller than the actual wall distance of the bathroom, and 20mm is reserved in the actual operation, and 20mm is the distance of the reserved wall tiles. Then the actual distance from the center line of the toilet drain (diameter 110) to the wall is 320mm or 420mm. >>>More
If you want to contact the after-sales merchant like this, if the purchase time is not long, I think the general merchant can be replaced!