The bathroom sliding door at home is dirty, how to clean it

Updated on Bathroom 2024-08-23
3 answers
  1. Anonymous users2024-01-24

    First, use chopsticks, thin sticks, etc. to pick out the debris in the track. Remove the dust deposited on the bottom rail, clean the corners with a rag dipped in water and dry them with a cotton cloth.

    Change the vacuum cleaner to a suitable suction head, suck away the granular debris and hair, then sprinkle it with dirt powder or alkaline surface, wait for 2-3 minutes, fully dissolve the dirt, and then wipe it with a damp cloth. In this way, most of the dirt in the track will be cleaned out. Then use a toothbrush to dip it in powder, focusing on cleaning up stubborn dirt, and soon the track will have a new look.

    Rub the rubber band by hand for 5 seconds to make the rubber band static electricity, put the rubber band into the sliding door track, push the rubber band with chopsticks to make the rubber band absorb the stolen goods, and then use chopsticks to take out the rubber band!

    If the shower has a spray gun, it is also good to rinse with a spray gun.

  2. Anonymous users2024-01-23

    Clean the tiles on the sliding door and the floor of the bathroom It is labor-saving and time-saving and clean, and the method of cleaning the bathroom: When doing hygiene, in order not to hurt the tile on the wall of the bathroom, wipe it with a damp cloth that wrung out the water, different stains, and different substances.

    1. Due to the stains splashed on the wall in the bath, use a damp cloth dipped in laundry detergent, soda noodles, cornmeal, etc., wipe any one of them, and then wipe it clean with water.

    2. Rust stains on the ground, with rubber gloves dipped in steel wool balls dipped in toilet cleaners and oxalic acid.

    3. For paint stains, first scrape off the paint with a wallpaper knife and then wipe it with laundry detergent.

    4. For more than one meter, first use a rag dipped in warm laundry detergent water and scrub it. Dip a rag in water and scrub again. Scrub first and then down.

    5. Below one meter, scrub with a cleaning ball dipped in dry laundry detergent first. Dip a rag in water and scrub again.

  3. Anonymous users2024-01-22

    Teach everyone how to scrub the scale of the bathroom sliding door.

Related questions
1 answers2024-08-23

The aluminum alloy should be thick, try not to use large pieces of glass, and if you must choose glass, you must choose tempered glass.

5 answers2024-08-23

You can use a buckle lock, but you can't do it outside the door to make a tag in use, and turn to the sign of use when you use it.

5 answers2024-08-23

How to remove dirt from the gaps in the bathroom tiles at home: >>>More

1 answers2024-08-23

As a result of smashing the wall, the original water pipe in the bathroom was galvanized pipe. >>>More

6 answers2024-08-23

The shower room must be tempered glass, the current shower room is mostly produced in Guangdong, Foshan and Zhongshan in Guangdong Province are the most, Zhongshan is better again, the frame of the shower room has aluminum alloy stainless steel, mostly aluminum alloy, there is no frame, the price of the shower room is 900 * 900 arc more than 1000-1500, in fact, it is good to do the partition, and the partition is the best to do the hanging slip, the price is 350-550 per square meter, because I see the shower room and the partition under the pulley under the erosion of the water, the life span is not more than 5 years". >>>More