Floor heating bathroom waterproofing practice is to do waterproofing or floor heating first

First do waterproofing, do two layers, pay special attention to the corners, yin and yang corners, and then do floor heating, if it is a kitchen and bathroom, it is best to do a layer when laying bricks.

Lay floor heating first, and waterproof it under the floor tiles, so that the height difference will not leak. Why don't I talk about it, you can understand it by drawing the process section of the threshold part yourself.

Do waterproofing first, and make the bathroom waterproof layer twice.

Generally, the bathroom is waterproof! Floor heating can be laid directly on top!! After laying the floor heating, do it again to waterproof!! It is better to be able to do waterproofing twice!!

The normal decoration procedure is to do waterproofing first.

The practice of waterproofing the floor heating bathroom, first of all, you need to apply some waterproof materials, and then you need to suppress it, and then lay some tiles after suppression, and finally carry out radiant floor heating, so that the effect will be relatively good.

It stands to reason that it should be waterproof first and then paved with floor heating. Then do the protective layer. Old house renovation if the underfloor heating has been paved. Then make a screed layer on top of the floor heating and do waterproofing directly. After waterproofing, lay the floor tiles, which is more convenient.

Before the bathroom is covered with floor heating, it should be waterproofed, and it is necessary to do two waterproofs, as follows:

1. The first waterproof: whether the bathroom leaks or not, a traditional waterproof must be done before the floor heating is laid, and the water injection test must be carried out for more than 48 hours without leakage or seepage before the construction can be carried out, because when taking a bath in the bathroom in the future, there will be a lot of water flowing on the ground, and if the waterproof is not done, it will not be good if it penetrates downstairs.

2. The second waterproofing: after the floor heating is paved, make a layer of waterproof on the floor heating, so as to prevent the ground water from penetrating into the floor heating protective layer, which can improve the thermal effect of the floor heating. Don't wait until the floor heating is paved and the tiles are pasted and you find a water leak, which will make the repair more costly.

Floor heating bathroom, first of all, do a good job of waterproofing. The waterproofing of the lower floors above ground is particularly important and is an important measure to prevent water seepage from leaking into the lower floors. After the waterproofing is done, when laying floor heating, the selection of materials must meet the standards, and you must not be greedy for cheap and choose inferior products.

After the underfloor heating is laid, after passing the test, the surface layer is laid.

It must be the first floor heating and then the cushion layer and then do waterproofing, not to mention whether the waterproof layer will be damaged in the construction of paving floor heating, and the water will penetrate into the insulation layer in the future, which will reduce the insulation and corrode the insulation layer.

I feel that it should be waterproof first and then paved with floor heating, because if the floor heating is leaking, it is not waterproof under the floor heating, but on the floor heating, if there is a problem with the floor heating, it may leak down, so it is not good for themselves to go downstairs, anyway, to do waterproofing, why not do it under the floor heating, so I feel that it is appropriate to do it below.

The bathroom should be covered with floor heating first and then waterproof, because if you do waterproof first, the floor heating pipe needs to be fixed when the floor heating is laid, which may damage the waterproof layer.

First do waterproof floor heating, in the upper layer of the waterproof layer, waterproofing needs to do a water avoidance experiment, need to observe a day without problems, before the next step of construction.

Floor heating bathroom waterproofing practice: is it waterproof first? Or do you want to lay underfloor heating first? There are pros and cons to these two methods, and the choice depends on how the subject chooses it.

Lay waterproof first, then lay floor heating: the advantage is that the indoor heating is fast, but if the floor heating waterproof performance is not good, it is easy to fail.

Floor heating first, then waterproofing: the advantage is that the waterproof performance is good, but the indoor heating is slower.

The bathroom is waterproof first, not floor heating, and the bathroom is generally installed with a radiator.

Of course, the floor heating bathroom is waterproof first, and then floor heating, because this will be more waterproof and the effect will be better.

It is necessary to do waterproofing first, and then do floor heating construction! I think that's basic common sense.

It should be paved with floor heating first, and then waterproofed after it is qualified.

Both.

After doing waterproofing, you must do a waterproof protective layer before you can pave the floor heating elevation has a certain impact.

First lay the floor heating, press the water test, then put a protective layer, and then do waterproofing.

Floor heating bathroom waterproofing practice: is it waterproof first?