-
Carpentry lining gypsum board + painter touch-up.
If you install a lamp, you can leave it unplugged.
If none of the above works, go to 5 gold and buy 2 plugging socket discs or squares, and plug the hole with a point structure or glass glue, which will not be too obvious, and it will be white, others will think it is a line mouth.
Both can be used, but it depends on the distance between the toilet and the wall behind it, generally the closer to the wall, the better, you measure it to see which one makes the toilet more against the wall.
When installed with cement to the ground, there is.
I didn't use it against the sewer. >>>More
It is recommended to find a merchant who sells this toilet to solve the problem - choose to plug it with a special material, or replace it with a suitable one. >>>More
The two holes in the bottom of the toilet bowl should be closed. Use one and close the other.
The hole you mentioned, the corresponding door frame has an iron pin, which is the iron pin applied out when the reverse lock is reversed, and it is inserted into the door frame to achieve the purpose of anti-prying.